Front suspension?

[the Ferret]

I used a bread wrap twist tie to measure mine easier to control tightness and you don't have to cut them off with a dikes. Put on twist tie, push it down against the seal, sit on bike, squeeze front brake tight, work forks 3 times, measure and photograph.

Adjuster with stock 3 bars showing..about 2" travel

[url=http://smg.photobucket.com/user/theferret111/media/suspensionCB1100003_zps3c0048f7.jpg.html]

adjuster backed out 4 bars showing... about 2 1/4 " travel
[url=http://smg.photobucket.com/user/theferret111/media/suspensionCB1100001_zps5e59775a.jpg.html]

adjuster backed out all the way... about 2 3/4" travel
[url=http://smg.photobucket.com/user/theferret111/media/suspensionCB1100002_zps9d91d221.jpg.html]

I run mine with 4 bars showing

***note I think at about 3 3/4-4" of travel your front fender would smack into your horns.