08-23-2025, 03:38 PM
While re-installing the battery back under the seat I noticed that the "seat lock" cable was halfway out of its original position and when I push it down, it clicked and lock itself into the correct position.
After a close up inspection, I understood that the cable came out of its seating clamp due to too much empty space above it. (hole/empty space is for inserting the cable).
When I moved the "seat lock" cable up/down, it came out of its normal position - should this happen when the seat is latch down and locked, It will be extremely difficult removing the seat.
To prevent future issue with the cable coming out of its original position, I inserted a short piece of rubber hose on top of the "seat lock" cable, push it all the way in and tape both items together.
By performing the modification, the "seat lock" cable will not come out of its position again.
See the picture attached.
Before modification
After modification
After a close up inspection, I understood that the cable came out of its seating clamp due to too much empty space above it. (hole/empty space is for inserting the cable).
When I moved the "seat lock" cable up/down, it came out of its normal position - should this happen when the seat is latch down and locked, It will be extremely difficult removing the seat.
To prevent future issue with the cable coming out of its original position, I inserted a short piece of rubber hose on top of the "seat lock" cable, push it all the way in and tape both items together.
By performing the modification, the "seat lock" cable will not come out of its position again.
See the picture attached.
Before modification
After modification