Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Knocking noises; vibrations in the handlebar; oil sipping at valve lid gasket
#5
(06-06-2025, 03:07 PM)TheLegend Wrote:
(06-06-2025, 09:18 AM)rdprdp01 Wrote: Good morning. We have great tuners and mechanics on the Forum. I am certain we can help you identify root causes.

Here are a couple of areas I encourage you to investigate.

Wheels which are not balanced or tires which are out-of-round or under-inflated can cause the vibration you described in your post.

Incorrect bar weights and worn suspension components can also be a contributing factor to vibrations reaching your hands on the handlebar.

Incorrect torque settings for tightened bolts (too tight or too loose) can also cause stress that can lead to vibrations.

I recall reading about a balancer backlash adjustment that may be relevant for the knocking noise. Check out this Thread and consider searching for others:


https://cb1100forum.net/forum/showthread...adjustment


Peterbaron, pdedse, and many others are better tuners than me. I am sure they can augment or correct my post when they have some time to consider the possible causes more thoughtfully than my off the cuff reactions.

Hope this helps. David
Thank you David for your good intensions! 
For sure is not from wheels or so, the vibrations are still present even if I stay and rev' it over 3-4k rpm
Regarding the balancer, I did it(when hot), I heard the whining(counter clock) and then I play all the range(clockwise) but nothing significant to be noticed so, I came back to the factory point +1 notch right-hand. But the knocking is still there loud and clear(in idle) Sad(
I've changed the oil from AmsOil 10-40 to Honda 10-30 but the same knocking. My mechanic suspects the noise is coming from the front camshaft witch can be loosened/not torqued well, but till we will open the lid we don't know

(06-06-2025, 01:46 PM)m in sc Wrote: check balancer adjustment at rh side of motor.
Regarding the balancer, I did it(when hot), I heard the whining(counter clock) and then I play all the range(clockwise) but nothing significant to be noticed so, I came back to the factory point +1 notch right-hand. But the knocking is still there loud and clear(in idle) Sad(

Copy that. You will win this war. Have faith and please continue to share the details. We all may end up on this Field in time.

Have a great weekend. David
2017 Honda CB1100 EX
The most sophisticated, smooth, perfectly engineered motorcycle I've ever owned. A pleasure in every way.
Reply


Messages In This Thread
RE: Knocking noises; vibrations in the handlebar; oil sipping at valve lid gasket - by rdprdp01 - 06-06-2025, 03:31 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve Adjustment and Camshaft Removal dave 5 349 03-21-2026, 04:49 PM
Last Post: Cormanus
  Valve Adjustment dave 6 571 08-29-2025, 10:46 AM
Last Post: dave
  Valve Cover Baffle lining ? bflint 6 659 07-26-2025, 11:27 AM
Last Post: bflint
  Valve Adjustment Intervals CBRider_imp 32 1,922 04-21-2025, 02:24 PM
Last Post: Jurlie_imp
  CB1100 EX CA K handlebar switches sprint 7 421 02-25-2025, 10:36 PM
Last Post: sprint
  2014 rear wheel knocking noise dunebuggy_imp 7 663 08-05-2024, 03:33 AM
Last Post: Yata-Garasu_imp
  Left Side Crankcase Gasket Part number. jbird06_imp 1 217 03-26-2024, 08:56 AM
Last Post: Lord Popgun
  Valve Adjustment Tolerances - How Far Do You Go? dave 14 1,048 10-18-2023, 09:28 PM
Last Post: The Gecko_imp
  Observed Valve Clearance Cormanus 16 894 03-06-2023, 09:03 AM
Last Post: Tejas_imp
  Arrow Slip on issue - stock gasket didn’t fit Ddawg1144_imp 4 324 02-21-2023, 07:51 AM
Last Post: Charlie Bravo_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)