Smaller turn signal/running light choices

[E11even_Hunnit]

Figured it was easier to revive an old thread than to start another turn signal thread.

I am looking for smaller turn signals and to relocate the rears to the license plate mount.


- trying to get my information straight. I don't want to need a flasher or resistor. So what light specs do I need to look for?


* if I want plug and play* (aside from extending the rear wires)

1. my understanding is I need 3 wire, Incandescent lights for the front to retain the running lights. Correct?

2. Does single or dual filament bulb matter?

3. Can I use 3 wire lights for the rear and just not use the third running light connection? (If I found a 4 pack of 3 wire)



I really want small bullet turn signals but they all seem to be LED and that sounds like a pain to change resistors or flashers to make LED work.

Rather put the money and effort towards other modifications than making simple taillights become a project.

Sent from my SM-G965U1 using Tapatalk

There's this, but then depending on your budget it may not be the best option since it doesn't include turn signals
https://www.samurider.com/?p=23031