11-04-2013, 02:17 AM
(11-02-2013, 10:54 PM)CIP57_imp Wrote: I'm wondering by locking in these value's does the ECU still have its functions to monitor for elevation changes, retard and advance timing for low or high octane gas. I know when they set up PC's at the track all these factors come into consideration.
installing the PCV does not change any functions of the ecu. All the sensors, except the O2, remain hooked up and continue to act on the ecu, except the O2 is replaced by resistors so that the ecu sees its input as a constant signal. I don't know what that constant signal is. The PCV doesn't prevent the ecu from doing anything it could do before. It adds or subtracts fuel from the injector signal after whatever map and trims the ecu is putting out. It does not lock in or change the ecu or anything that happens within the ecu. As well, anything the ecu cannot do before, it still cannot do after installing the PCV..... such as retard and advance timing for low and high octane gas.
doctor:"the operation was a success"
patient:"will I be able to play the piano?"
doc:"yes, of course"
patient:"that's amazing, I never could before"