09-24-2015, 12:18 PM
Hey guys, I need some help. I just got back from a ride tonight and something happened when I was on my way back. At a stoplight, I had trouble going from 2nd gear to 1st. The trouble was that I pressed the shifter all the way down, but it only went to N, no further. As I continued home, I found that the motorcycle also had trouble going from 1st to 2nd gear when I pressed the shifter all the way up. Between 1st and 2nd, the transmssion stops at N. Even when I try hitting the shifter again, it doesn't move into 1st or 2nd for 1-3 times before it finally shifts. The motorcycle is a 2013 Honda CB1100 still under warranty. I has 1,700 miles on it. The clutch fluid/brake fluid was normal. I also checked the shifter and it seemed fine, not loose or anything. I couldn't check the engine oil because it was still hot and hadn't settled. What do you suggest I do?