04-17-2016, 08:39 AM
(04-17-2016, 05:19 AM)Riko_imp Wrote: Hi,
is it normal the cylinder cap on the head sticks out a bit?
Its the one on the right, the rear one.
In this exploded view, part number 2
Thx
Riko, below are some photos of the caps on my bike. The cover has been off three times for valve checks. All is OK and these photos may help. When re-installing the cover the packing (gasket) needs, after inspection for condition, to be replaced carefully. The cut outs need a sealant applied before reassembly.
![[Image: 48d87eeb30a50e3bc27833751c2431c3.jpeg]](https://cb1100forum.net/forum/uploads/imp/201604/48d87eeb30a50e3bc27833751c2431c3.jpeg)
![[Image: 947516f12eeb32ca2a24da8da100de7a.jpeg]](https://cb1100forum.net/forum/uploads/imp/201604/947516f12eeb32ca2a24da8da100de7a.jpeg)
![[Image: dbd2b3130790810ea14c790d16d842c7.jpeg]](https://cb1100forum.net/forum/uploads/imp/201604/dbd2b3130790810ea14c790d16d842c7.jpeg)
Cheers

![[Image: b9553d20434bd24f5a11c3f24db68bdd.png]](https://cb1100forum.net/forum/uploads/imp/201604/b9553d20434bd24f5a11c3f24db68bdd.png)