The CB1100 Community Forum › Honda CB1100 Discussions › Mechanical & Technical v
refitting head pipes

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
refitting head pipes
modmaster_imp Offline
Running Like a Top
Posts: 58
Threads: 12
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2015
#10
05-07-2016, 05:36 AM
All is well in Hondaland. I just had to place a box under the rear of the headers and I was able to start the pipes into the cylinder head ports. Also I noticed that some of the hold down flanges had to be turned 180 degrees to line up properly with the studs. They must only fit in one way.
Thanks to all who were kind enough to chime in with their thoughts.

modmaster
Find
Reply


Messages In This Thread
refitting head pipes - by modmaster_imp - 05-06-2016, 07:07 AM
RE: refitting head pipes - by Cormanus - 05-06-2016, 07:19 AM
RE: refitting head pipes - by Lord Popgun - 05-06-2016, 07:34 AM
RE: refitting head pipes - by Cormanus - 05-06-2016, 07:56 AM
RE: refitting head pipes - by Lord Popgun - 05-06-2016, 07:56 AM
RE: refitting head pipes - by Cormanus - 05-06-2016, 08:15 AM
RE: refitting head pipes - by Lord Popgun - 05-06-2016, 08:23 AM
RE: refitting head pipes - by modmaster_imp - 05-06-2016, 12:27 PM
RE: refitting head pipes - by Lord Popgun - 05-06-2016, 09:06 PM
RE: refitting head pipes - by modmaster_imp - 05-07-2016, 05:36 AM
RE: refitting head pipes - by the Ferret - 05-07-2016, 05:39 AM
RE: refitting head pipes - by Lord Popgun - 05-07-2016, 05:50 AM
RE: refitting head pipes - by Cormanus - 05-08-2016, 04:42 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Brake reservoir screw head issue satchit 72 5,339 04-24-2022, 11:55 PM
Last Post: Houtman_imp
  Chrome cylinder head cap Juancho76_imp 21 1,620 04-03-2022, 08:48 AM
Last Post: Juancho76_imp
  Cams, Compression, Head Work? boynton6spd_imp 12 963 08-08-2021, 02:27 AM
Last Post: old blue_imp
  CB900 Custom oil stopper on valve head AOrhun_imp 9 791 01-27-2021, 10:06 PM
Last Post: Houtman_imp
  Fork Tube hex head bolt tool fitment ? bflint 8 708 11-30-2020, 06:24 PM
Last Post: jtopiso_imp
  Cylinder Head cover oil leak and valve clearance increase. zirconxi_imp 6 645 09-01-2020, 12:19 AM
Last Post: peterbaron
  JIS Cross Head Screw Drivers 2017EX_imp 15 1,316 04-15-2020, 01:53 AM
Last Post: peterbaron
  Corrosion on pipes PowderToastMan_imp 30 2,039 02-08-2019, 02:07 PM
Last Post: GoldOxide_imp
   H4 Head light Bulb Question Ennsync_imp 36 2,505 12-30-2018, 01:48 PM
Last Post: GoldOxide_imp
  Front head light position Ennsync_imp 5 482 10-11-2018, 03:28 AM
Last Post: Ennsync_imp

Forum Jump:


Users browsing this thread: 3 Guest(s)