05-04-2016, 10:56 AM
The manual (for both '13 and '14) say when changing the oil filter, ensure the boss is tight. If not, apply locking agent and torque to specified value.
The boss specs are: Thread diameter: 20mm, torque 13 ft lbs. Apply locking agent.
The manual says to use medium strength locking agent, unless otherwise specified. Nothing is otherwise specified
(for the boss, that is)
The boss specs are: Thread diameter: 20mm, torque 13 ft lbs. Apply locking agent.
The manual says to use medium strength locking agent, unless otherwise specified. Nothing is otherwise specified
(for the boss, that is)
