07-20-2016, 05:29 AM
Okay, here goes my cuss up moment
I wanted to clean the inside of the gearbox cover and after doing this I wanted to tighten the 4 bolts....
I misread my SERVICE MANUAL
and use a torque settinng of 54NM (wich is actually for the big bolt for the chain) although the service manual did not specify a torque setting for those 4 bolts.
The pictures so you know where I'm at: (click to enlarge)
[url=https://postimg.org/image/yil9kccjl/]
[url=https://postimg.org/image/qed5flq4h/]
[url=https://postimg.org/image/gv3gm52m9/]
[url=https://postimg.org/image/l5i4hq7pd/]
[url=https://postimg.org/image/8s5aati0x/]
[url=https://postimage.org/app.php]screen shot windows
My bike is still in waranty but I doubt the dealer would do this for free (wich I would not blame him if I have to pay for my own stupidity) IF there is any method of unscrewing the head thats still in there?
FYI, the 3 other bolts can be used, although 2 of them were almost at the point of breaking too, as you can see on the picture, there is a narrow section you can see on 2 bolts.
Main concern, I want that freaking bolt out!
Thx everybody for any input.
I wanted to clean the inside of the gearbox cover and after doing this I wanted to tighten the 4 bolts....
I misread my SERVICE MANUAL
and use a torque settinng of 54NM (wich is actually for the big bolt for the chain) although the service manual did not specify a torque setting for those 4 bolts.The pictures so you know where I'm at: (click to enlarge)
[url=https://postimg.org/image/yil9kccjl/]
[url=https://postimg.org/image/qed5flq4h/]
[url=https://postimg.org/image/gv3gm52m9/]
[url=https://postimg.org/image/l5i4hq7pd/]
[url=https://postimg.org/image/8s5aati0x/]
[url=https://postimage.org/app.php]screen shot windows
My bike is still in waranty but I doubt the dealer would do this for free (wich I would not blame him if I have to pay for my own stupidity) IF there is any method of unscrewing the head thats still in there?
FYI, the 3 other bolts can be used, although 2 of them were almost at the point of breaking too, as you can see on the picture, there is a narrow section you can see on 2 bolts.
Main concern, I want that freaking bolt out!
Thx everybody for any input.