11-03-2017, 09:36 PM
I am guessing that air bubbles hanging up some where in the system might have caused the problems.
Years ago when trying to bleed the lines on some of my CBX's it was sometimes a pain to get the brakes hard.
I resolved this by taking the bike for a ride on a " rough " road and that loosened all the air bubbles.
On my CB 1100 's I installed speed bleeders and using a vacuum bleeder with air compressor made the fluid change a piece of cake.
Most the time when things are not right after doing something we did something not right.
Years ago when trying to bleed the lines on some of my CBX's it was sometimes a pain to get the brakes hard.
I resolved this by taking the bike for a ride on a " rough " road and that loosened all the air bubbles.
On my CB 1100 's I installed speed bleeders and using a vacuum bleeder with air compressor made the fluid change a piece of cake.
Most the time when things are not right after doing something we did something not right.