National Cycle Street Shield EX Disconnect

[KPSguy_imp]

Maybe some pics of how its mounted?

Ah yes, pics would help!

After looking at it more closely, it seems that the brackets may not be aligned properly. The lower mount attachments are situated at the top of the forks. I tried to get the upper handlebar mounting brackets as similarly aligned as possible, but there is a slight variation due to cabling.

I think you can see from these pics that the ball-end connector is coming in at an angle. I'm guessing I need to remedy that.


https://i.imgur.com/X0pj7oL.jpg

Ah yes, pics would help!

After looking at it more closely, it seems that the brackets may not be aligned properly. The lower mount attachments are situated at the top of the forks. I tried to get the upper handlebar mounting brackets as similarly aligned as possible, but there is a slight variation due to cabling.

I think you can see from these pics that the ball-end connector is coming in at an angle. I'm guessing I need to remedy that.


https://i.imgur.com/X0pj7oL.jpg

Yeah MAN! I've the same sheild . Try mounting the lower brackets lower.
It's not gonna lean way back, but itll work.
My install has worked well for 3 plus years. Just a little shimmy at 70 plus.

2013 Cb 1100 , 73 Cb 500 four ,72 Cb 500 four (do the ton) 82 Cb650Sc "Nighthawk "