National Cycle Street Shield EX Disconnect

[Randy B]

Maybe some pics of how its mounted?

Ah yes, pics would help!

After looking at it more closely, it seems that the brackets may not be aligned properly. The lower mount attachments are situated at the top of the forks. I tried to get the upper handlebar mounting brackets as similarly aligned as possible, but there is a slight variation due to cabling.

I think you can see from these pics that the ball-end connector is coming in at an angle. I'm guessing I need to remedy that.


https://i.imgur.com/X0pj7oL.jpg

Ah yes, pics would help!

After looking at it more closely, it seems that the brackets may not be aligned properly. The lower mount attachments are situated at the top of the forks. I tried to get the upper handlebar mounting brackets as similarly aligned as possible, but there is a slight variation due to cabling.

I think you can see from these pics that the ball-end connector is coming in at an angle. I'm guessing I need to remedy that.


https://i.imgur.com/X0pj7oL.jpg


Yeah...those are some really bad angles. You want the arm to come into the screen as perpendicular as possible.
This is how I had mine mounted before I got the Road comet.
http://cb1100forum.com/forum/showthread....+shield+ex