08-05-2019, 11:55 AM
To check the clutch plates movement you can remove the plastic black oil filler plug on the right hand side and have a look inside.
Do not run the engine with the oil filler cap removed, it will splash out of the opening!
I can see about 2 mm movement in the clutch basket which is right below the opening if the clutch lever is pulled in through that opening.
Another thing to check is when the bike is on the centerstand with the engine off ; put it in gear and rotate the rear wheel, notice any unusual sounds or movement of the chain.
Do not run the engine with the oil filler cap removed, it will splash out of the opening!
I can see about 2 mm movement in the clutch basket which is right below the opening if the clutch lever is pulled in through that opening.
Another thing to check is when the bike is on the centerstand with the engine off ; put it in gear and rotate the rear wheel, notice any unusual sounds or movement of the chain.