08-05-2019, 09:39 AM
If that bike is a ‘14 and you have never flushed the fluids, that could be a good place to start. Just by what Pekingduck said about the master cylinder. Flush the clutch.
Make sure you first remove all the fluid from the MC geting it all out down to the bottom where crud likes to settle to. Then put in new fluid and do the flush. Never pull the lever with no fluid in the MC. AND cover your tank as brake fluid will ruin/remove paint.
Make sure you first remove all the fluid from the MC geting it all out down to the bottom where crud likes to settle to. Then put in new fluid and do the flush. Never pull the lever with no fluid in the MC. AND cover your tank as brake fluid will ruin/remove paint.