07-14-2017, 10:16 AM
Here is where I ordered mine. http://www.cycleterminal.com/hm-sealed-series-090.html
Scroll down to the 2 pin HM-090-2. You need the female one. WAIT, I may be wrong here. Sorry, its been a while. You should check as according to what I see on the Link DAC posted, you need the male. Well, trust, but verify. I'm not taking mine back apart to verify
Be aware that the accessory plugs are capped, so remove the cap and then see what you need.
Scroll down more and there is a kit. That is what I got.
At the bottom is the crimp tool. Notice the picture on the left of the pin. Notice there are 2 crimps. One crimps the wire, one crimps the seal to the pin/wire. Notice the crimp tool has 6 places to crimp with. Some on the wire, some for the seal. There ain't no instructions.
I guess you could call him, or I'll send you the sheet I found. Done correctely, that tool makes a nice crimp. I would suggest buying extra pins to practice on...
Scroll down to the 2 pin HM-090-2. You need the female one. WAIT, I may be wrong here. Sorry, its been a while. You should check as according to what I see on the Link DAC posted, you need the male. Well, trust, but verify. I'm not taking mine back apart to verify
Be aware that the accessory plugs are capped, so remove the cap and then see what you need.Scroll down more and there is a kit. That is what I got.
At the bottom is the crimp tool. Notice the picture on the left of the pin. Notice there are 2 crimps. One crimps the wire, one crimps the seal to the pin/wire. Notice the crimp tool has 6 places to crimp with. Some on the wire, some for the seal. There ain't no instructions.
I guess you could call him, or I'll send you the sheet I found. Done correctely, that tool makes a nice crimp. I would suggest buying extra pins to practice on...