02-04-2020, 10:26 AM
So removing two or even three out of six sounds plausible to me just compare it with the 2013 below.
Gentlemen, I would not recommend removing springs because this would result in uneven pressure on the plates. However, there's a very good chance that you could replace all of the existing springs with springs that have a lower spring rate. You could check after-market availability, but if that didn't work you could research the sizes and spring rates of other Honda models. I'm sure if you look hard enough you will find something to work for you. Good luck!
Gentlemen, I would not recommend removing springs because this would result in uneven pressure on the plates. However, there's a very good chance that you could replace all of the existing springs with springs that have a lower spring rate. You could check after-market availability, but if that didn't work you could research the sizes and spring rates of other Honda models. I'm sure if you look hard enough you will find something to work for you. Good luck!