Login

NHCB_imp · 08-27-2014, 04:08 AM

He told me he would like to try as many different things as he could, so I bet he would like both pipes. Also just for your piece of mind Hiker, he said the actual run time on the bike would be minimal. Most of the time would be on the computer.

CIP57_imp · 08-27-2014, 06:44 AM

Put the stock exhaust on or bring it with you. Don is looking to Dyno a stock bike in turn he will not charge you for the Dyno time, then do a few pulls with the other can and see if there is any difference. The flash file is already done, he may even give you a discount on that.

Elipten_imp · 08-27-2014, 01:13 PM

Bring stock can to him and I'll chip in also.

Sent from my iPad using Tapatalk

HikerToo_imp · 08-29-2014, 04:25 AM

OK, stopped by Guhl's today to setup my time and talk to Don.
I'll drop it off to him this Tuesday the 2nd, although he is busy and may have it until the following week.
He did walk out to look at my CB since he has not seen one in person.
I plan to bring the stock muffler too.
I'm sure the idea is for him to build a more accurate and finely tuned flash file based on results with the Dyno, not use the one he already did for a couple of our guys already.
Because the timing is going to be altered, there is a chance I may need to run Premium gas after this work....we'll see.
I'll keep everyone updated

DAC · 08-29-2014, 04:42 AM

Premium gas with a 9.5/1 compression ratio? Really?

kDiqq_imp · 08-29-2014, 05:43 AM

(08-29-2014, 04:42 AM)DAC_imp Wrote: Premium gas with a 9.5/1 compression ratio? Really?

With timing advanced, oh yeah. I've had motors as low as 9.1:1 knock with more timing and low octane fuel. But on a stock tune, yeah use regular Tongue

Sent from my Z30 using Tapatalk

CIP57_imp · 08-29-2014, 05:49 AM

(08-29-2014, 04:25 AM)HikerToo_imp Wrote: OK, stopped by Guhl's today to setup my time and talk to Don.
I'll drop it off to him this Tuesday the 2nd, although he is busy and may have it until the following week.
He did walk out to look at my CB since he has not seen one in person.
I plan to bring the stock muffler too.
I'm sure the idea is for him to build a more accurate and finely tuned flash file based on results with the Dyno, not use the one he already did for a couple of our guys already.
Because the timing is going to be altered, there is a chance I may need to run Premium gas after this work....we'll see.
I'll keep everyone updated

Good for you Hiker, never met Don but per our conversations he's a real nice guy.

Lama glama_imp · 08-29-2014, 06:34 AM

Please keep us updated.

Randy B · 08-29-2014, 08:08 AM

Anxiously waiting. Big Grin

**Cormanus** · 08-29-2014, 08:17 AM

Feeling cheated. Sad

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ECU Flash rev limiter etc	PowerDubs_imp	34	3,383	07-06-2025, 01:05 AM Last Post: Cormanus
	2017 ECU Flash question	Kalamari_imp	5	462	09-11-2019, 04:31 AM Last Post: Kalamari_imp
	Horn/Flash Button Reverse Idea	2017EX_imp	16	1,004	10-10-2018, 08:50 AM Last Post: redbirds_imp
	Re-tune/flash necessary with full exhaust upgrade?	Rebel73_imp	11	751	04-09-2015, 06:28 AM Last Post: CB4ME_imp
	flash to pass night time mod	fredkb_imp	10	614	11-07-2014, 01:30 PM Last Post: OldF7Guy_imp
	Hepco & Becker Junior Flash 30s	jodyz_imp	15	787	03-29-2014, 10:58 AM Last Post: Cormanus

Threaded Mode ECU flash
Author	Message