+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: ECU flash (/showthread.php?tid=10104)
ECU flash - NHCB_imp - 08-26-2014
Last week I asked the question PCV or Bazzaz. I was informed about Don at Guhl Motors that does an ECU flash. After some research and talking to Don I think that is the way to go. The problem as most of you know is he has not been able to dyno a bike yet. He said in 2013 there was tons of hype about the CB and doing the flash but no one close to him would commit to bringing their bike there. He said he can do a general flash and it will be an improvement, but a dyno tune will have awesome benefits. So I am contemplating taking the 400 mile trip there for my benefit and all yours. But I realistically cant afford to take the time off work, drive my old truck out there and rent a room. Id have to stay for a few days for him to try different things with tuning. It may be doable for me next season, but now would be tough.
So Im really hoping/asking will someone closer will consider bringing their bike to him? There are a lot of things that our bikes can gain if he can get one of these bikes for a few days.
ECU flash - grover_imp - 08-26-2014
+1 BUMP!
Sent from my iPhone using Tapatalk
RE: ECU flash - kDiqq_imp - 08-26-2014
I'd do it if I wasn't in south Texas... actually that's not true, I'd do it if I could get enough time off!
Sent from my Z30 using Tapatalk
RE: ECU flash - HikerToo_imp - 08-27-2014
OK!!!!!!!!!!!
I'll do it.
Just checked with wife, we can drop it off on Sept. 22nd.
Assuming I don't pay extra for the Dyno work, maybe just the Flash.
I'll call Don to see if he can work on it that week.
If someone goes sooner, please let me know.
I have the 2013 CB1100 with Staintune.
I would ask that he concentrate on low and mid range performance, I am not looking for peak HP at peak RPM.
If anyone wants to donate to my ECU guinea pig work, PM me for PayPal account :-)
If he was open on weekends I would have had it done by now.
ECU flash - grover_imp - 08-27-2014
(08-27-2014, 12:26 AM)HikerToo_imp Wrote: OK!!!!!!!!!!!
I'll do it.
Just checked with wife, we can drop it off on Sept. 22nd.
Assuming I don't pay extra for the Dyno work, maybe just the Flash.
I'll call Don to see if he can work on it that week.
If someone goes sooner, please let me know.
I have the 2013 CB1100 with Staintune.
I would ask that he concentrate on low and mid range performance, I am not looking for peak HP at peak RPM.
If anyone wants to donate to my ECU guinea pig work, PM me for PayPal account :-)
If he was open on weekends I would have had it done by now.
Nice!! I'll donate a few bucks for a worthy cause
PM sent!
Sent from my iPhone using Tapatalk
RE: ECU flash - NHCB_imp - 08-27-2014
[quote='HikerToo' pid='56794' dateline='1409149565']
If anyone wants to donate to my ECU guinea pig work, PM me for PayPal account :-)
Thanks Hiker!
I was thinking of asking the same question if I was going to make the trip. I will pitch in a few bucks for gas.
RE: ECU flash - HikerToo_imp - 08-27-2014
Thanks for the PayPal offers.
Let's wait until its done and I've had time to test, will see how it goes than and how much Don plans to charge me.
If I can work out a day sooner with my wife, will try to get it in sooner.
Thanks again!
RE: ECU flash - rboe - 08-27-2014
If you can take your stock can for us cheap skates that won't be buying one, that would be uber cool. And I'll chip in for gas and chips.....
RE: ECU flash - HikerToo_imp - 08-27-2014
I'm willing if Don wants to Dyno test with Staintune AND stock muffler, but I don't think there would really be much a of a difference, do you?
I could see if it were a muffler AND header...
RE: ECU flash - Randy B - 08-27-2014
You'd be surprised.