Wyvern 4-4 Exhaust On The Way...

[M3-SRT8_imp]

Until it gets here, I was wondering whether I need to pick up anything extra to install it on the bike.

Stuff like exhaust sealant, gaskets, special tools, etc.

Do I need anything else?

Thanks.:huh:

 

[CB4ME_imp]

Four header crush gaskets and a tool to remove the O2 sensor. I wouldn't think exhaust sealant is needed.

 

[rboe]

Have it shipped to my place. I'll figure it out for you. Then do some long term testing to make it's right. :angel:

 

[ChipBeck_imp]

Four header crush gaskets and a tool to remove the O2 sensor. I wouldn't think exhaust sealant is needed.

Gentlemen,

How does one remove the old crush gaskets? Those things are really stuck in there.

Chip

 

[the Ferret]

In the past I have used a pointed pick with a bent tip (like dentist might use for scraping tarter from between tour teeth) hook it on the inside and pop it out.

 

[lash_imp]

If you take a flat screwdriver and tap it with a small hammer, tip on the inside lip of the gasket, will put the gasket enough out of round that you can use a dental pick or such to pop it out. The gaskets are very soft and all you need is enough space between it and the head to get a pick in behind it.
I made my own O2 tool. Worked perfect.

 

[M3-SRT8_imp]

Thanks.

Any Torque Specifications I should use?

 

[lash_imp]

Book says exhaust pipe joint nuts, headers to engine, is 16 ft/lb.

 

[Toddman_imp]

Four header crush gaskets and a tool to remove the O2 sensor. I wouldn't think exhaust sealant is needed.

Gentlemen,

How does one remove the old crush gaskets? Those things are really stuck in there.

Chip

Gentlemen,

How does one remove the old crush gaskets? Those things are really stuck in there.

Chip
A spring tool works great. Looks like a bent pick with a handle built in.

 

[M3-SRT8_imp]

Waiting, waiting...

 

[M3-SRT8_imp]

Oh, Goody...hy:



[url=http://s268.photobucket.com/user/300cSRT8_photos/media/2013%20Honda%20cb1100/Wyvern%204-4%20cb1100%20031_zpsly7hyaub.jpg.html]

 

[the Ferret]

Ohhhh mannnnn..

 

[brougham79_imp]

I think that qualifies as a "sensual sound" lol

 

[jrns_imp]

that's going be very nice on your bike...don't forget to post lots pics when your done!!

 

[M3-SRT8_imp]

that's going be very nice on your bike...don't forget to post lots pics when your done!!

Will do.

 

[the Ferret]

Adjust the chain before you install them

Chain adjustment

 

[Guth_imp]

Finally! It will be good to see this dream actually become a reality for you. Good stuff.

 

[TINK_imp]

Love the look, can't wait to see pictures of them installed.

 

[drodg33]

a video with sound would be nice also

 

[M3-SRT8_imp]

Well packed.



Ooooh. Shiny!

[url=http://s268.photobucket.com/user/300cSRT8_photos/media/2013%20Honda%20cb1100/Wyvern%204-4%20Exhaust%20cb1100%202%20002_zpsdzq2znhx.jpg.html]

Can't read Japanese. Anybody have these translated? Thanks.

[url=http://s268.photobucket.com/user/300cSRT8_photos/media/2013%20Honda%20cb1100/Wyvern%204-4%20Exhaust%20cb1100%202%20004_zpsfibpvh4m.jpg.html]