who already has in thier head what they will do to the 14 Deluxe?

[the Ferret]

Remembered something else I will do

11. Remove the curb feelers from the footpegs

Also .......

After looking at mock up by howlindaug, I will probably

12. Add fork gaiters

13. Add chrome meter covers

14. Paint the headlight bucket to match the tank and side covers.

 

[Damfino_imp]

Just a few of what I have planned so far....

1) K & H Hi Seat
2) ADJ. Foot Pegs
3) Rear Rack*
4) Heated Handgrips*
5) Active Polished Stainless Engine Guards*
6) Whitehouse K-10 Front Fender*
7) Comet II Fairing or NC Screen (undecided)
8) GPS Hookup
9) Remove Reflectors
10) ????

* = Already on order.

 

[flynrider]

Take a DLX, put on a 4 into 1 pipe, smaller black tank, black side panels and black out the engine. That would be so.....oh wait.... Never mind.

 

[ride4now_imp]

Take a DLX, put on a 4 into 1 pipe, smaller black tank, black side panels and black out the engine. That would be so.....oh wait.... Never mind.

Then you'd have the only '2013' with a 6-speed transmission... That would be cool. :idea:

 

[Panama Biker_imp]

Anybody know where to get a set of 18" spokes wheels for the CB's? Please?

That is the only thing I want to change on mine. Add my Kriega packs to the back of the bike and go enjoy the heck out of it

 

[flynrider]

The only spoke wheels that I've heard of for the CB11 are for the '14 EX model. Available in Europe and Asia only.

 

[Panama Biker_imp]

Thanks Flynrider. I believe it would be a hard proposition to get the EX's. There has to be a set someone makes aftermarket in the US... I cannot be the only CB11 nut to want those on my bike... Or am I?

 

[the Ferret]

We have a couple members who would love em, Ack and Greg Davis come to mind, but nothing is available at this point and I don't think a wheel guy like Buchannons can whip a set out because of how the disc rotors are carried on the wheels.

 

[Aussieflyer]

I am also keen on spoke wheels which are available but expensive ...

http://www.samurider.com/?p=13377/#itemImage

 

[the Ferret]

is that $3000 bucks? (we need a shocked emoticon)

 

[flynrider]

Yep, $3K. Those are custom aftermarket wheels. I wonder if Honda charges that much for factory EX wheels?

The place where I get my tires specializes in making custom bike wheels. I'm thinking they could probably make up a set for less than $3K.

The Wheel Shop–Arizona's Oldest Custom Motorcycle Shop | Phoenix, AZ

 

[the Ferret]

I'm thinking much of the expense is custom machined hubs.

 

[Todd-badebiker_imp]

When I get my DLX end of next month the list will consist of but not limited to:
1-Daytona K0 look side covers
2-Rear carrier: Honda or aftermarket haven't decided
3-Wind screen: still deciding though the Chic Designs are nice
4-engine guards: Honda or aftermarket
5-exhaust: going to see if Supertrapp Supermegs can be adapted
6-TSR funnels I like the old school name "Velocity Stacks"
7-PCV or Bazzaz
8-Possibly a seat depending on the ol' butt
9-Etc.

Other than the above tons of tires and lots of oil and gas!

 

[ChipBeck_imp]

Gentlemen,

I don't have a '14 Delux but before I picked up my 2013 I had in my minds eye exactly what I wanted it to look like and what I wanted to change. I wanted it to look pretty stock when finished. The final Chip Beck Spec is the toughest and is requiring a lot of time and thought to pull off. But if it works out it will be a lot easier to duplicate. Stay tuned.

Chip

 

[drodg33]

I really like my Dart Windscreen it is the larger Marlin screen. I just got from Mr. T a Honda rear rack and I think I will put a throttle lock of some kind on it.