Vance&Hines

[Stealth128_imp]

Not that I care but my friend who just purchased a CB 1100 asked about a Vance&Hines 4 into one exhaust. I had several 750 Nighthawks with them. Anyway They seem to have poor chrome that rusted had to bend the pipes to get them to fit correctly. What is on the market that would have the same look and of course much better quality then what Hines produced?

 

[1100rider_imp]

I would tell to look at a Yoshimura slip on exhaust. I have one on mine and am very pleased with it. It also comes with hardware to keep the center stand which some do not.

 

[Stealth128_imp]

I would tell to look at a Yoshimura slip on exhaust. I have one on mine and am very pleased with it. It also comes with hardware to keep the center stand which some do not.

Thanks already discussed she wants a full system.that looks like the Vance&Hines
But much better quality.

 

[Gumby 1100_imp]

The Moriwaki One-Piece Exhausts in either Stainless or Black look somewhat similar to the Vance & Hines.
At just over $900 they don't seem too bad.
The Stainless system is supposed to discolour like the stock 4-into-1 header.

http://www.samurider.com/?p=6448

http://www.samurider.com/?p=6461

 

[the Ferret]

Here's one for an 83 CB 1100 Honda

http://www.ebay.com/itm/like/250743071690?lpid=82

I don't think it looks THAT different from stock. The stock is just missing a kink, and is a little longer.

 

[Ridem32_imp]

I just bought a 1983 CB1100f the motor looks about the same as my 14 deluxe! Exhaust my work not sure. But I might find out. My 83 is a one owner 15,000 miles runs strong and has the bassanni ( misspelled) pipe

 

[Randy B]

 

[Papa Weeley_imp]

Ohhh...I loved the deep, mellow tone of a Bassani exhaust. I don't know if they're even still around, but you sure don't see them anymore like you used to.

 

[Houtman_imp]

My first CBX had a Bassani six into one , beautiful !
Stupidly I swapped it for an original 6 into 2.

 

[Inline4_imp]

IMO, the best looking 4-into-1 exhaust for our '13 CB1100 is this work of art from NOJIMA; offred by samurider.com
No, it isn't chrome but dang it is a beautiful bit of engineering.
http://www.samurider.com/?p=18295/#itemImage
Now all I need is $1400 and a competent tuner!

 

[Randy B]

 

[Papa Weeley_imp]

Great looking pipe, especially on that black bike (although I think black side covers would really make this bike). And it definitely has the correct '70s/'80s look, instead of the slip-on cans that most systems have for these bikes. Unfortunately, I'd be hard-pressed to put anything but chrome on my red '13...