Mounting a GoPro on the CB1100. Some ideas.

[EarsOnWheels_imp]

Spot the GoPro Hero Session 4.

 

[the Ferret]

By the left front turn signal. Man thats pretty well hidden. Like the hand guards.

 

[c-breezy_imp]

Spot the GoPro Hero Session 4.

Haha it's so tiny. Right in front of the front left turn signal.

 

[Riko_imp]

Spot the GoPro Hero Session 4.

what kind of mount did you use for your cube?
I've done something similar with my Polaroid Cube+

 

[CB4ME_imp]

An chest mount provides a good vantage point which includes the gauges and hand controls . Wearing the camera on your body helps to isolate it from the bumps to provide a steadier video. Got a GoPro chest mount yesterday at Walmart for the $39 list price. Hope to test it tomorrow.

 

[Riko_imp]

forgot to share my new cockpit view...
Handy to have a rear view.






Dang, I like what Honda did with the meters and the display of the new models.

 

[emptysea]

Very cool.

 

[Ulvetanna_imp]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

 

[kmoney_imp]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them.

 

[Cormanus]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

That's very interesting. There's a continuing debate in Australia about the legality of mounting cameras on helmets.

 

[Elipten_imp]

Not to be mean but it seems obvious attaching anything but especially something that protrudes and changes the form of the helmet compromises the design of the helmet. When the impact occurs on the attached device it would greatly affect the distribution of the received forces to to helmet shell and interior and no doubt concentrating the force to a small area versus spreading the force on the shell. Since the helmet designer has no way to know how, where or what was attached to the helmet; there can no way to model the forces to compensate.

Seems rather intuitive if you think about it for a moment

 

[Ulvetanna_imp]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them.

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games

 

[kmoney_imp]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them.

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games One of the Pokémon locations (hiding place or whatever you call them) somehow ended up being located in our Police Headquarters downtown -- they had to issue a news briefing to tell people to stop trying to come in to a functioning police department and try to wander around looking for Pokémon. I swear this game makes people turn their brains off.

 

[Ulvetanna_imp]

michael schumacher (F1 driver) got serious brain injuries in a skiing accident and a gopro was strongly implicated (2014)
the helmet broke where the camera was mounted
in the time since it's been determined anything mounted on a helmet of any type can cause a torque to the helmet or additional damage
most track day orgs now ban any helmet-mounted cam

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them.

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games One of the Pokémon locations (hiding place or whatever you call them) somehow ended up being located in our Police Headquarters downtown -- they had to issue a news briefing to tell people to stop trying to come in to a functioning police department and try to wander around looking for Pokémon. I swear this game makes people turn their brains off.

Didn't know that. I know a lot of guys who still do this on the street -- definetely something to share with them. i heard about the gopro safety think at my last track day but did not know about michael s until i read this thread and looked it up

but yes intuitively one would think anything mounted to the helmet is not such a good plan

pretty sure a snell rated lid would not crack or puncture from a gopro but the notion of the camera preventing the helmet sliding or creating snapping or torquing of the neck does not appeal to me

its also a distraction but then again have you heard of the two guys playing pokemon go who fell off a cliff looking for a pokemon...

yes it happened and where else but california

big signs and fence and they still fell nearly a hundred feet

wonder if they found their pokemon btw they are going to be fine

some folks do not need to get out of the house they should stay home to play their video games One of the Pokémon locations (hiding place or whatever you call them) somehow ended up being located in our Police Headquarters downtown -- they had to issue a news briefing to tell people to stop trying to come in to a functioning police department and try to wander around looking for Pokémon. I swear this game makes people turn their brains off. its really a bad deal

they have put the locations in areas that create hazards and inconvenience people

it will only be a matter of time until legal challenges arise on the question of using a true location which is private property as a feature of a game that is a commercial enterprise

this truly stretches and will ultimately define the idea of personal property rights

if a home or business is used to generate use of the game that can in some way be construed as creating a right to royalties

however i and a millenial i asked about this both believe it will ultimately be too much trouble for the couch potatoes to get up and put gas in the car and tackle traffic when they can just as easily stay home and play video games

burnout will occur within a few weeks maybe sooner if folks keep turning up dead as with one location or continue falling off cliffs

 

[john07876_imp]

I've personally had some great footage mounting my cam using a roll bar tube clamp onto the fork stanchion just above the limit of fork travel. It gives good rider view rolling as the bike leans in the twisties. Just check it's not catching the horn or you will end up with horrible vibration noise.....

 

[Cormanus]

G'day john07876 and welcome to the forum. Why not pop over to the new members section and tell us about yourself?

 

[zbillster_imp]

So I "best offered" this GoPro mount off of eBay for $3 with free shipping:

And this is where I put it ... I actually use an Activeon CX (GoPro knockoff) I got for $25 new in box off eBay, nice little deal. Came with the sealed case and GoPro mounts are compatible:

The plastic seems a little flimsy on the $3 mount, but vibration was far less than I expected. Location fail though ... tachometer photobombed the whole shot. May try mounting on the engine guards next.

 

[Riko_imp]

that audio though :-/

 

[zbillster_imp]

Okay, trying it on the left engine guard ...

Better results, but the camera got mighty warm, even on a short 15-minute ride. Enters Lightspeed Mode around 1:35. I may try the fluid reservoir mount next.

that audio though :-/

Yeah, the audio on this camera sucks. If it's recording anything remotely loud, it distorts and booms pretty badly.

You can adjust the audio recording volume in the Activeon settings or turn it off, but you have do it every time you turn the camera on, and then it's involves cycling through menus and pushing the button about 10 times, so a pain.

 

[zbillster_imp]

that audio though :-/

I had YouTube wipe the distorted original audio and substitute copyright-free background music instead.