ECU on its way to Guhl's!

[Lord Popgun]

Daskraut, it is under the tank. Here is a pic. There are others. ecu

 

[dsinned_imp]

Daskraut, how much for a spare ECU on ebay? New or used?

 

[dsinned_imp]

Has there ever been any thought toward a "group purchase" of Guhl's services? $375 is way up there for most of us, and I dare say the majority here are only interested in a "stock bike" reflash to get rid of the limiters, and other restriction (e.g. lower gears' timing retardation). For a group buy of a dozen minimum, a reflash "special" price of around $175, I suspect many here would "sign up" in a heartbeat to do this.

Anybody have any connections with Guhl to make such an inquiry?

 

[CIP57_imp]

Kmoney. You are exactly right. That is what usually happens. This is the first 4 cylinder bike I have owned and I have owned plenty of motorcycles in the past.I'm 69 years old and have seen a lot of different kinds of engines. I think I expected to much from the reflash on this engine. After about 3 or 400 miles on the reflash I have come to notice that there is definitely more power but it has to be wound up to really notice it. I still think the mixture is not right at full throttle but it does pull very hard when I wind it to redline in the first 3 gears. I did have it up to 120mph twice. Once in 4th gear and once in 5th. Both times at that speed I rolled off the throttle a bit and it seemed to be picking up. Sure sign that engine is not happy with the mixture at that operating range. Like others have already said on this forum the reflash does help the part throttle pick up and overall I do see great roll on pull at 60 or 70mph so I see that it is better than stock but not as good as the reflash on my 2013 Triumph T100. That made a good 6 to 8 horsepower more and 5 to 6 more lb.ft. of torque and gave increases in at all throttle positions and great overall driveability. I'm still happy enough to leave it alone the way it's running. Modmaster

They tend to run a bit rich from 7-9K with the flash and PC5 installed. This bike likes to run a bit above 13.2 a/f ratio for top performance. A touch leaner creates a bit more HP but will run hotter.

Has there ever been any thought toward a "group purchase" of Guhl's services? $375 is way up there for most of us, and I dare say the majority here are only interested in a "stock bike" reflash to get rid of the limiters, and other restriction (e.g. lower gears' timing retardation). For a group buy of a dozen minimum, a reflash "special" price of around $175, I suspect many here would "sign up" in a heartbeat to do this.

Anybody have any connections with Guhl to make such an inquiry?

Honda has the toughest ECU to crack without drilling the unit. Don spent days cracking mine and dyno time on a members bike. 375 is the going rate for a flash.

 

[Cormanus]

Used to be a bloke in the park down the road who flashed for free. Don't recall he charged anything for a re-flash.

Boom, boom, ching!

 

[Rebel73_imp]

Ok, so I got her out on the highway yesterday during my ride with my club and I opened her up as soon as I got on the onramp. It was awesome! Pulled very hard to red line. I hit 100mph very quickly. Very happy!

 

[Ulvetanna_imp]

Kmoney. You are exactly right. That is what usually happens. This is the first 4 cylinder bike I have owned and I have owned plenty of motorcycles in the past.I'm 69 years old and have seen a lot of different kinds of engines. I think I expected to much from the reflash on this engine. After about 3 or 400 miles on the reflash I have come to notice that there is definitely more power but it has to be wound up to really notice it. I still think the mixture is not right at full throttle but it does pull very hard when I wind it to redline in the first 3 gears. I did have it up to 120mph twice. Once in 4th gear and once in 5th. Both times at that speed I rolled off the throttle a bit and it seemed to be picking up. Sure sign that engine is not happy with the mixture at that operating range. Like others have already said on this forum the reflash does help the part throttle pick up and overall I do see great roll on pull at 60 or 70mph so I see that it is better than stock but not as good as the reflash on my 2013 Triumph T100. That made a good 6 to 8 horsepower more and 5 to 6 more lb.ft. of torque and gave increases in at all throttle positions and great overall driveability. I'm still happy enough to leave it alone the way it's running. Modmaster

They tend to run a bit rich from 7-9K with the flash and PC5 installed. This bike likes to run a bit above 13.2 a/f ratio for top performance. A touch leaner creates a bit more HP but will run hotter.

Has there ever been any thought toward a "group purchase" of Guhl's services? $375 is way up there for most of us, and I dare say the majority here are only interested in a "stock bike" reflash to get rid of the limiters, and other restriction (e.g. lower gears' timing retardation). For a group buy of a dozen minimum, a reflash "special" price of around $175, I suspect many here would "sign up" in a heartbeat to do this.

Anybody have any connections with Guhl to make such an inquiry?

Honda has the toughest ECU to crack without drilling the unit. Don spent days cracking mine and dyno time on a members bike. 375 is the going rate for a flash.

I remember that. Guhls is going to do it right.

 

[daskraut_imp]

Used to be a bloke in the park down the road who flashed for free. Don't recall he charged anything for a re-flash.

Boom, boom, ching!

I had to read it twice to get it!. :excited:

 

[Cormanus]

Thank you daskraut. I appreciate it.