Daytona seat

[Chris Goldson_imp]

Have just bought a Samurider Daytona seat for my 2015 CB1100.

Has anyone fitted one of these and if so do I need to transfer the rubbers from the standard seat and the catches too onto the Daytona seat ?

Best wishes


Chris

 

[Cormanus]

Chris, I have a recollection that at least one aftermarket seat required swapping the hardware from the OEM number, but a search has failed to turn up the thread. If you do have to, I can’t imagine it will be too difficult.

 

[mustakoira_imp]

I have this seat, and can confirm you do need to transfer the catches from the stock seat to the new seat.

 

[Chris Goldson_imp]

I have this seat, and can confirm you do need to transfer the catches from the stock seat to the new seat.

Many thanks for your help - much appreciated

 

[Obleo]

Ditto on the hardware swap, makes it a little difficult to swap seats quickly. On my Harley my extra seat came with all the correct hardware can do a quick swap,also twice the seat and half the cost. Sundowner is the type.

 

[motoWest_imp]

Swapping out the rubber hardware took me longer than I'd like to admit. Getting them off the original seat wasn't too hard, but fitting them into the new seat was . . .annoying. I believe I ended up having to use a little dish soap to ease the way.

 

[E11even_Hunnit]

pics?