Login

Sodbuster_imp · 10-23-2020, 10:29 PM

Is it even possible to buy just a seat pan?

I've been researching and can't find one, I'm not even sure of the correct definition: seat pan, seat plate, etc. I couldn't find it through Samurider, Webike, or even OEM.

I used my own stock seat to build a new seat, worked out great but still not right so moving on to next idea and would rather build another rather than tear down the seat I'm using.

Anyone build there own seat?

Sodbuster

**Cormanus** · 10-24-2020, 05:30 PM

The pan would just be timber and the fittings, wouldn't it?

Houtman_imp · 10-24-2020, 09:17 PM

Try to buy a cheap one on Ebay with like a split cover or some other damage to the foam part but not the seat pan itself.

tod.branko_imp · 10-26-2020, 01:36 PM

(10-23-2020, 10:29 PM)Sodbuster_imp Wrote: Is it even possible to buy just a seat pan?

I've been researching and can't find one, I'm not even sure of the correct definition: seat pan, seat plate, etc. I couldn't find it through Samurider, Webike, or even OEM.

I used my own stock seat to build a new seat, worked out great but still not right so moving on to next idea and would rather build another rather than tear down the seat I'm using.

Anyone build there own seat?

Sodbuster

A lot of people build fiberglass diy seat bases nowadays, it's not overly complicated and might prove to be a garage weekend well spent.

Sent from my ONEPLUS A5010 using Tapatalk

Sodbuster_imp · 10-26-2020, 10:53 PM

(10-24-2020, 05:30 PM)Cormanus_imp Wrote: The pan would just be timber and the fittings, wouldn't it?

LOL, aint to sure if that's joke, as in panning for gold?

(10-26-2020, 01:36 PM)tod.branko_imp Wrote:
(10-23-2020, 10:29 PM)Sodbuster_imp Wrote: Is it even possible to buy just a seat pan?

I've been researching and can't find one, I'm not even sure of the correct definition: seat pan, seat plate, etc. I couldn't find it through Samurider, Webike, or even OEM.

I used my own stock seat to build a new seat, worked out great but still not right so moving on to next idea and would rather build another rather than tear down the seat I'm using.

Anyone build there own seat?

Sodbuster
A lot of people build fiberglass diy seat bases nowadays, it's not overly complicated and might prove to be a garage weekend well spent.

Sent from my ONEPLUS A5010 using Tapatalk

A lot of people build fiberglass diy seat bases nowadays, it's not overly complicated and might prove to be a garage weekend well spent.

Sent from my ONEPLUS A5010 using Tapatalk Now THAT, is interesting. I'm going to look into it...

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Advice - carry water bottle and side stand plate?	4 Paws_imp	41	1,899	07-23-2022, 06:02 PM Last Post: rich_imp
	improved seat and 3 cm higher SEAT. the best reform	Alfgaxatico_imp	1	234	04-25-2021, 04:47 AM Last Post: GoldOxide_imp
	License Plate/Tail Light Bracket	eddi0_imp	0	189	03-08-2021, 09:42 AM Last Post: eddi0_imp
	Honda "Power of Dreams" License plate frames	pekingduck	15	939	06-01-2020, 11:24 AM Last Post: TXBikerGuy
	Getting rid of the ugly license plate bracket.	ChipBeck_imp	93	4,140	05-21-2020, 02:02 AM Last Post: Gone in 60
	Side mount plate number CB1100RS	Moe_rider_imp	0	216	11-03-2019, 07:54 PM Last Post: Moe_rider_imp
	Skid plate	justinlself_imp	10	553	12-01-2016, 12:16 AM Last Post: Ulvetanna_imp
	Headlight number plate combo	Hondahawkrider_imp	5	333	09-01-2016, 02:11 AM Last Post: redbirds_imp
	Turn signal relocation and license plate bracket	kennyw	3	273	07-30-2016, 10:36 AM Last Post: the Ferret
	Honda license plate	Macross_imp	6	400	06-15-2016, 01:52 AM Last Post: Macross_imp

Threaded Mode Where to get a seat pan/plate?
Author	Message