Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
About to order the '17 dual bending valve forks for my '14
#21
Looks all right to me. Be interested to hear how you like them.
Reply
#22
Man it sure does look nice!
Reply
#23
Oooh shiny! Yep will be interesting to find out how they compare to std forks.
Reply
#24
(06-30-2017, 09:51 AM)Lord Popgun_imp Wrote: I think he meant, wouldn't the forks be longer, or shorter, for different diameter wheels?

yep, geometry of the bike is where i was going. also did not realize the ex doesn't get the radial calipers, which could make a difference in rotors. I do like very much that they don't have the reflectors built into them. dam*! now i'm wanting yet another thing for my bike! da*n!
Reply
#25
None of the bikes reflectors are truly built-in – they are just held on with adhesive tape.


Sent from my iPhone using Tapatalk
Reply
#26
Home from work, everything is tq to spec- about to take her out and see what's what.

From my initial sitting on the bike and pushing up and down- they feel soft- but I think that is somehow the way these valves are supposed to work.
Took it for a quick run up over the mountain and back. Mission accomplished I think- seem to be more plush and soak up the imperfections more than the stock forks did. Less chatter feeling, less harshness.

For this ride I left the preload right where it was, which was the same as the stock forks initially.

I'm going to turn them in a line like I did on the other ones, that seems to be better for me.
Reply
#27
Found your thread... This is pretty interesting. Did the mod change the amount of dive under braking? Also, and I may have missed this, what was the approximate cost of the replacement forks?
Reply
#28
(07-05-2017, 10:59 AM)PowerDubs_imp Wrote: I don't know, but if they are not, there is just as much chance of any factory fork not being filled correctly.


Sent from my iPhone using Tapatalk
[Image: 3b44ec14dad9f1938aa1cefe5bb6889c.jpg][Image: 6a361788dda1fdf271df662a91d14a66.jpg]


Sent from my iPhone using Tapatalk
[Image: 07381b74f2208759601bbe3812b75a17.jpg]


Sent from my iPhone using Tapatalk
[Image: 35f84f9b134cdba2ec1a8b722243f8ba.jpg]


Sent from my iPhone using Tapatalk
[Image: 4b842fdfcfe9fcb68bb4976e32d9de5b.jpg]


Sent from my iPhone using Tapatalk
I love that all these years later, decades even- this wheel looks old.

[Image: 7398d9ea4e15fb3a977eb8134bb2fd0d.jpg]


Sent from my iPhone using Tapatalk
Now that is as they say- a proper bit of kit. [Image: 6fa104d0c8657c20ebda2e9a1afbb9c0.png]

[Image: d47efb7bb54763ca11165a6572d1644b.jpg]


Sent from my iPhone using Tapatalk
Confirmed – 110% plug-and-play. Will most likely test ride tomorrow.

[Image: fb98800b056768070f4c248d03c671f4.jpg]


Sent from my iPhone using Tapatalk
Good mod, but for the price I would rather use the Andreani kit. I like the black forks. I'd be interested to hear more about the improvements compared to stock forks.
Reply
#29
I agree, on the blacked out '14 Standard I prefer the look of the black forks and the all-black wheels.
Reply
#30
(01-17-2018, 01:24 PM)EmptySea_imp Wrote: Found your thread... This is pretty interesting. Did the mod change the amount of dive under braking? Also, and I may have missed this, what was the approximate cost of the replacement forks?
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve clearance price Maturecheese_imp 44 3,191 03-05-2024, 07:11 AM
Last Post: Gone in 60
  Whoa- this CB1100 dropped a valve seat- PowerDubs_imp 13 1,113 10-23-2023, 11:43 AM
Last Post: 1973cb750
  Still lookin for that valve cover..... FLYTYM_imp 0 160 10-28-2020, 07:34 PM
Last Post: FLYTYM_imp
  Valve Extensions rbike_imp 4 373 09-16-2020, 01:48 AM
Last Post: Gone in 60
  still going to play with the front forks ohiorider_imp 5 433 08-13-2019, 09:31 AM
Last Post: peterbaron
  CB1100 Dealer Order Availability In The US suhawk305 30 1,751 10-22-2018, 07:52 AM
Last Post: apex1_imp
  Thought I was done with the CB - trying again (forks) ohiorider_imp 80 4,594 09-30-2018, 11:20 AM
Last Post: LongRanger_imp
  Revised valve clearance check interval ohiorider_imp 28 1,557 02-23-2018, 08:38 PM
Last Post: jtopiso_imp
  Where do you order your OEM parts from? jdvalero_imp 9 497 11-07-2017, 04:38 AM
Last Post: rozbabbo1100_imp
  Be carefull what you order from Amazon jdvalero_imp 10 585 10-29-2017, 03:19 AM
Last Post: Chris Goldson_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)