Posts: 271
Threads: 14
Likes Received: 189 in 88 posts
Likes Given: 209
Joined: Apr 2025
Hoping to get lucky and someone might be able to point me in the right direction. When I purchased my 2014 CB1100 last year the PO had hand warmers installed (They are awesome if you don't have them). Sadly after a week of driving the cap came off that had the hand warmer button on it while riding it. I just need to find the cap again, or an idea to make my own. It was just plastic tabs that held in the original and will do something better to make sure it doesn't fall off again. They still work currently so I don't need a new setup if I can avoid it. Thanks for reading!
Posts: 7,076
Threads: 94
Likes Received: 575 in 312 posts
Likes Given: 962
Joined: Apr 2025
Posts: 271
Threads: 14
Likes Received: 189 in 88 posts
Likes Given: 209
Joined: Apr 2025
By chance know the part #?
I don't believe they are since it isn't tied into the dash heated grip light.
Posts: 7,076
Threads: 94
Likes Received: 575 in 312 posts
Likes Given: 962
Joined: Apr 2025
(02-07-2025, 12:19 AM)MagnaRider_imp Wrote: By chance know the part #?
I don't believe they are since it isn't tied into the dash heated grip light.
There is no such thing like the dash heated grip light indicator... or I misunderstand you?
OEM heated grip that was installed on my 2014 std and DLX: P/N 08T70-MGC-D31
Sub harness sold separately P/N 08A30-MGE-300 < this was not installed on my DLX, not so sure about my std.
Posts: 271
Threads: 14
Likes Received: 189 in 88 posts
Likes Given: 209
Joined: Apr 2025
Really? There is a light on my dash that looks exactly like a heated grip when I start the bike, goes away instantly.
Does the OEM heated grip flash green when activated? The button looked similar to the one pictured, to bad I don't think I can purchase just the cap however.
Posts: 7,076
Threads: 94
Likes Received: 575 in 312 posts
Likes Given: 962
Joined: Apr 2025
What I mean by dash are meters, tach and spedo, not the heated grip "dash"
My OEM h/grip has a single readout red indicator with 3 settings, 1 flash = min, 2 flashes = mid, 3 flashes = max, and after each flash it stays lit which means it's ON and working.
Posts: 271
Threads: 14
Likes Received: 189 in 88 posts
Likes Given: 209
Joined: Apr 2025
the light I am talking about is in the gear indicator readout "dash". I'll take a picture of it this weekend.
That sounds how mine works however its a green light not red. Thanks for the help
Posts: 7,076
Threads: 94
Likes Received: 575 in 312 posts
Likes Given: 962
Joined: Apr 2025
Based on my pics and experience, you have OEM heated grips:
![[Image: 368d01cb77c9ecbe8f4616c1fef69595.jpg]](https://cb1100forum.net/forum/uploads/imp/202502/368d01cb77c9ecbe8f4616c1fef69595.jpg)
.............
![[Image: c4d72eaa0873fea520e1a9498238318a.jpg]](https://cb1100forum.net/forum/uploads/imp/202502/c4d72eaa0873fea520e1a9498238318a.jpg)
As to the dash/cluster gear shifter indicator > N <, I think this is what you are now talking about...??
Two different circuits and purpuse
Posts: 1,672
Threads: 41
Likes Received: 140 in 67 posts
Likes Given: 39
Joined: Apr 2014
That's the OEM heated grip set, and the top part missing has the button to push the little switch button that turns it on and changes temp range.
That part is was never available separately from Honda.
The grip kit, which fits other Hondas, does not include the specific harness for your bike, is P/N 08T71-MKK-D02, and goes for around $225.00
Posts: 271
Threads: 14
Likes Received: 189 in 88 posts
Likes Given: 209
Joined: Apr 2025
Thank you both for the help! Yea I kinda figured I'd be biting the bullet so to speak on just being able to purchase a cover. I am going to try to make something to cover it and keep the moisture out.
I'm glad at least it is the OEM heated grip set so its quality!
Also PB I will take a picture of my dash/indicator/whatever (THE SCREEN IN THE MIDDLE LOL) this weekend because its definitely not the Neutral indicator.
Thanks again!
