14 CB1100 stock exhaust (cat)

[Feelergaugephil_imp]

Hi all, So I removed the "slip on" stock muffler as I'm cleaning everything up.
So I start the bike up without the muffler, OMG! sounds amazing, not too too loud, Ive ridden it around the sub division (30 mph) sounds awesome...
I think its not crazy crazy loud because of the cat within the collector box, has anyone actually tried to long drill it or try punch it through?

I ask, because I'm looking at buying a full system Delvic or similar name.
If I can knock a hole through it, I'll just buy a slip on rather than the whole system...
Looking at options,,,, THX guys...

[jedd_imp]

Hi all, So I removed the "slip on" stock muffler as I'm cleaning everything up.
So I start the bike up without the muffler, OMG! sounds amazing, not too too loud, Ive ridden it around the sub division (30 mph) sounds awesome...
I think its not crazy crazy loud because of the cat within the collector box, has anyone actually tried to long drill it or try punch it through?

I ask, because I'm looking at buying a full system Delvic or similar name.
If I can knock a hole through it, I'll just buy a slip on rather than the whole system...
Looking at options,,,, THX guys...

This is what the inside of a 2014 OE slip on looks like
on the exit end;



and there's a welded washer
on the inlet end

[Feelergaugephil_imp]

I'm not talking about the muffler, I'm talking about the CAT inside the 4 downpipes/collector.

[peterbaron]

I just checked the blocking plate (OEM'14)at <1, it is located inside, about 1 foot from exhaust outlet...may drill out and see what happens..

[Charlie Bravo_imp]

On my '13 I removed the end cap with the three screws, drilled eighteen .475in. holes in the end plate with almost no effect whatsoever. I've read that some riders drilled six holes and got an amazing sound, but not so here.

[Feelergaugephil_imp]

Thanks everyone.
FYI, I removed the WHOLE silencer and I'm talking about the catalytic converter within the lower headers, NOT the silencer end.

[Feelergaugephil_imp]

Bought me a $53 shorty slip on... saved my quadzillions from that samaria expensive website in Japan.

[Chuckk_imp]

how about a pic of the slip-on installed..do you have dual exhaust or just a single exhaust ..do you have center stand issues..I installed dual after market slip-ons.. the reverse cone shorties.. they sound great!! .. I would leave the cats alone.. as you know, there is some nice sounds coming from them.. when I added my emgo slip-ons, the nice sound was still there.. I had to go to a muffler shop to have 2 short "s" extensions made.. they run from the cat, out to the side of the bike , then back.. then just slip on the slip-on's ..[/b


[b]the packing was lacking ..... easy to take apart, I bought packing and rebuilt the mufflers right away.. it gave the exhaust a throatier sound.. the deeper sound was just perfect..

[Feelergaugephil_imp]

I cant post pics, I use my cellphone for everything, I could send my pics to someone who could possibly upload them, I'm on the facebook CB1100 forum. (Phil Brownleader)

[Cormanus]

Tapatalk in your mobile (cell) makes posting photos a breeze.

I’d offer to help out, but I’m away from home.