Login

Scoobynut_imp · 05-07-2013, 04:28 AM

So, the first thing I did to my bike was apply 3M clear bra material to the rear of the tank. I took lots of pictures of the process in case anyone else is interested. I just thought I would gauge interest before I uploaded all the pics and wrote a how-to. All I'll say is it's just a nice feeling to never again have to worry about scratching the rear of that pretty tank!

I would also be willing to mail the template I cut to whoever is interested in using it. I don't really want to become a mail department, so I would probably leave it up to the members to mail it around to other members, or, if someone else wanted to, they could make copies and mail them to other members. I will however, mail it to the first person who requests it. Having the template would make the clear bra install process much easier for folks who've never custom cut a template before. As an added bonus, I cut the template in such a way that it also prevents the seat from scuffing the paint where it contacts the tank.

Anyways, I recall promising to write a clear bra how-to some time ago on the ADV CB1100 thread, so here I am, ready to show the way for anyone who's interested. Smile

the Ferret · 05-07-2013, 04:33 AM

Post it up in the How To section. Love to see your process.

Lord Popgun · 05-07-2013, 04:34 AM

Well I'm interested. My email is everett.mclendon@earthlink.net

I was even thinking of going to a place that installs it on cars, but this would be better.

ron1100_imp · 05-07-2013, 04:48 AM

Scooby,
Thanks for doing this. I've been worried about the tank from day one. Is the template already scanned and and electronic form for distribution?
Also, do you have any plans for the side of the tank where the inner thigh possibly make contact?

Phat Ham_imp · 05-07-2013, 04:50 AM

I'm interested too. I've been wondering if anyone had done this yet.

Scoobynut_imp · 05-07-2013, 05:59 AM

(05-07-2013, 04:48 AM)ron1100_imp Wrote: Scooby,
Thanks for doing this. I've been worried about the tank from day one. Is the template already scanned and and electronic form for distribution?
Also, do you have any plans for the side of the tank where the inner thigh possibly make contact?

Funny you ask, Ron, I just got back from a ride and noticed a few dull scuffs on the side where the knees of my pants were contacting the tank. I've already got the scuffs out, so clear bra material will get cut tonight and go on the sides. I may also cut some for the top of the tank as I like using a magnetic tank bag. I did the rear, the knee cutouts on the side, and the top of the tank of my Super Tenere and it really has saved the paint from a lot of damage. But that bike has a rougher life than this one will!

Well, I think there's enough interest to write the how-to, so I will get to work posting pics and the writeup tonight.

(05-07-2013, 04:48 AM)ron1100_imp Wrote: Scooby,
Thanks for doing this. I've been worried about the tank from day one. Is the template already scanned and and electronic form for distribution?
Also, do you have any plans for the side of the tank where the inner thigh possibly make contact?

Hmmm, I never thought of scanning it like that; I guess the scale would be correct and I can always compare the scan to my original for size. I will save my templates from the knee cutouts on the tank too. They will be a little more difficult, but shouldn't be that hard on this bike the way the cutouts are nice and -- more or less -- flat.

(05-07-2013, 04:34 AM)Lord Popgun_imp Wrote: Well I'm interested. My email is everett.mclendon@earthlink.net

I was even thinking of going to a place that installs it on cars, but this would be better.

No need to have someone do it, not on a bike -- my how-to should walk you through it.

Cars are a whole different matter; I've done several hoods and they turned out pretty damn nice, but talk about a lot of work and exertion. You actually have to stretch-to-fit one side of the hood once the other side is in place. It was worth saving $300-400 dollars, though.

ke6hgi_imp · 05-07-2013, 07:35 AM

Please post it!

Scoobynut_imp · 05-07-2013, 07:53 AM

(05-07-2013, 07:35 AM)ke6hgi_imp Wrote: Please post it!

Coming soon!

Lord Popgun · 05-07-2013, 08:03 AM

(05-07-2013, 07:53 AM)Scoobynut_imp Wrote:
(05-07-2013, 07:35 AM)ke6hgi_imp Wrote: Please post it!

Coming soon!

Coming soon!
Dang, I was first and STILL don't get the prize! Big Grin

How'd ferret jump in front of me anyway.. Angry

j/k

the Ferret · 05-07-2013, 08:24 AM

I dont want the pattern .... i just enjoy looking at pictures of processes Big Grin

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	2014 CB1100 Clear Turn Signal Lenses	Ngavrielidis1_imp	16	1,302	04-15-2025, 06:23 AM Last Post: Ngavrielidis1_imp
	Move the arrows back to clear the bags	Enzofour_imp	5	538	01-25-2022, 06:20 PM Last Post: Enzofour_imp
	Clear clutch cover #3	tory_imp	3	366	02-06-2021, 01:49 AM Last Post: tory_imp
	Clear clutch cover #2	tory_imp	4	328	01-28-2021, 01:37 PM Last Post: E11even_Hunnit
	Clear clutch cover	tory_imp	30	1,681	01-24-2021, 07:07 AM Last Post: pekingduck
	Removed tank stickers, installed clear tank protector	ryanschillinger_imp	6	502	07-01-2016, 12:09 AM Last Post: Guth_imp
	clear LED tail light	Arctic cb1100_imp	9	627	02-21-2016, 04:55 AM Last Post: Arctic cb1100_imp
	clear turn signal lens	DJS_imp	11	790	07-16-2015, 10:21 AM Last Post: Lord Popgun
	Clear bra	Scudrunr_imp	15	732	03-27-2015, 07:07 AM Last Post: Lord Popgun
	Turn signals, clear, LED, rigid?	Vossero_imp	4	256	07-16-2014, 03:59 AM Last Post: Papa Weeley_imp

Threaded Mode 3M Clear bra to protect tank
Author	Message