Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My CB Project
Author Message
Paul_imp Offline
First Service Completed


Posts: 49
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2015
My CB Project
#1

Hi there,

I have bought my CB in July and wanted to wait until 12 000 Km service to customize it to be sure of what I really want.
I only added the crash bars and the honda rear racK.

As this milestone is approaching rapidly, here is where I stand:

- K10 Chrome Front Fender

- Fork Bellows --> Kawasaki Fork Boots (49006-1335)

- Chrome gauge covers --> Still hesitate with a wind protection like the road comet fairing as I travel long distance for holidays but drastic change of look

- New seat for long distance rides but that costs a lot

- Chrome handlebar end weights

- A lower handlebar --> Don't like the genuine look of them but like the riding position and I am only 1,70m tall. Maybe Honda Handlebar Low type. Has anyone tested it ?

- New mirrors much lower --> I have no precise idea yet

- New oil cap in aluminium (I find the black plastic one ugly)

- An unique touch: I want to include an oil temperature gauge in the right side cover like the K0 side cover style but with a gauge instead of the fake oil cap. As I don't like the massive look of the K0 side cover I am considering a tailor-made cover on the exact model of the genuine one with that extra part for the gauge and the CB1100 four emblem. I do not have any clue yet where to put the oil temperature captor without messing with the ECU settings

All suggestions are most welcome Smile


02-21-2016, 02:29 AM
Find Reply
quietguy_imp Offline
Been There


Posts: 534
Threads: 40
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2015
RE: My CB Project
#2

I enjoyed your Youtube videos, Paul. Well done.


02-21-2016, 02:42 AM
Find Reply
Cormanus Offline
Super Moderator

Queensland, Australia
Posts: 16,119
Threads: 342
Likes Received: 667 in 366 posts
Likes Given: 777
Joined: Apr 2025
My CB Project
#3

Paul, check out the classifieds section of the forum under members' products. There's a bloke who makes good looking oil caps.


02-21-2016, 07:06 AM
Find Reply
Lord Popgun Offline
El Supremo RLET Force

Virginia
Posts: 8,026
Threads: 21
Likes Received: 180 in 103 posts
Likes Given: 122
Joined: Apr 2025
RE: My CB Project
#4

On this board, it's generally believed that Kawasaki gaiters are if not the best, at least top of the line and hold up very well and long. Ferret can provide the part number.

OK, found it: http://cb1100forum.com/forum/showthread....ki+gaiters


02-21-2016, 12:58 PM
Find Reply
Paul_imp Offline
First Service Completed


Posts: 49
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2015
RE: My CB Project
#5

Thanks quietguy !

Cornamus, that's precisely what I m aiming to. Perfect

Popgun, I would be ordering one this week end Smile

I have asked Samurider for the fake oil cap side cover but they do not have an item of such sort. I think I will have to build it from fiberglass or find someone that can do it...

Have you got an idea how much shipping and custom could cost for the front fender K10 from Samurider ?


02-22-2016, 10:41 PM
Find Reply
Lord Popgun Offline
El Supremo RLET Force

Virginia
Posts: 8,026
Threads: 21
Likes Received: 180 in 103 posts
Likes Given: 122
Joined: Apr 2025
RE: My CB Project
#6

The way Samurider works is, you email Mr. T with what you want. He will email back with a quote that covers the item(s) cost and shipping. If you agree, he will email an invoice where you pay on-line (pay pal, but you do not need an account). Then, if the stuff does not have to be built to order, you will get it in 2-4 days. Hard to believe, but it is fast. It is sent by air to the US.

The last thing I ordered was a Road Comet 1 with multiple windscreens. Can't remember how much shipping was, but wasn't bad.

Remember the time difference in Japan so you may only be able to get one email per day. Mr. T speaks excellent English so is very easy to work with.

It is best to email him directly and not use the get quote button by the items. Currently there seems to be a problem with that.


02-22-2016, 11:03 PM
Find Reply
Chapomis_imp Offline
Road Warrior


Posts: 1,029
Threads: 64
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2015
RE: My CB Project
#7

This is the direct email I use for Takashi: contact@samurider.com


02-22-2016, 11:48 PM
Find Reply
Paul_imp Offline
First Service Completed


Posts: 49
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2015
RE: My CB Project
#8

11700km. The next service is approaching quickly and I will make some changes at that time.

I will probably order:




This for the tank:


And the fork below from the W650

I still hesitate for the handelbar and mirrors. I have seen this but this is more a cafe handelbar style. I would like to flatten the line of the CB though:




One thing is sure: Motorcycle make me a child again Smile


07-26-2016, 12:47 AM
Find Reply
clearviewx Offline
Been There

Western Massachusetts
Posts: 673
Threads: 26
Likes Received: 5 in 5 posts
Likes Given: 62
Joined: May 2025
RE: My CB Project
#9

I like that front fender the best farkle..

you should have bought a DELUXE
2014 Honda CB1100 DLX
2002 Honda CB750 Nighthawk


07-26-2016, 01:07 AM
Find Reply
Shinchan_imp Offline
Running Like a Top


Posts: 58
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2015
RE: My CB Project
#10

Any idea where to get that front fender? I can't seem to find it on Samurider site.

(07-26-2016, 12:47 AM)Paul_imp Wrote: 11700km. The next service is approaching quickly and I will make some changes at that time.

I will probably order:




This for the tank:


And the fork below from the W650

I still hesitate for the handelbar and mirrors. I have seen this but this is more a cafe handelbar style. I would like to flatten the line of the CB though:




One thing is sure: Motorcycle make me a child again Smile


07-26-2016, 01:31 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  “Katsumi” - a new project in the making Zee9_imp 18 914 06-22-2021, 02:33 AM
Last Post: emptysea
  Designing an Engine Oil Temperature Display Gauge Project 17-CB-002 37 1,635 11-06-2019, 04:10 AM
Last Post: GoldOxide_imp
   Saturday morning project - Road Comet 2 Fairing LuckyNLife_imp 11 758 09-16-2019, 11:36 PM
Last Post: Cobalt23_imp
  CB1100 Backrest Project metalmaven_imp 64 3,409 03-14-2019, 10:56 AM
Last Post: Cormanus
   My Cafe Racer project CSODenmark_imp 21 1,107 04-07-2018, 07:21 AM
Last Post: Reiver_imp
  White House project started Ack-CB11_imp 60 2,892 10-20-2016, 03:38 AM
Last Post: use2b_imp
  Vintage Saddlebag Project - Mounting tips please? specialist8 7 429 05-16-2016, 02:05 AM
Last Post: emptysea
  2013 Muffler Project Ralph_imp 11 677 10-23-2015, 01:24 AM
Last Post: Ralph_imp
  Check out my tank project brougham79_imp 38 1,448 07-28-2015, 05:38 AM
Last Post: brougham79_imp
  CB1100 Project F Guth_imp 10 441 08-24-2014, 02:43 AM
Last Post: Mr Jangles_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)