Login

Huladog_imp · 05-17-2016, 07:02 AM

Now you've gone and made me order one from eBay! At that price might as well give it a shot since I used to have the way more expensive Road Comet on my 2013 but didn't want to spend that kind of $$ again so this option should work well on my black 2014.

To answer the question above on which model to look for?

Use this in your search "EMGO Venom Mark II Fairing". Found mine for about $54.00 with free shipping.

I might have a nice Dart Flyscreen up for sale soon if this works well!

Aloha,
Huladog

aschem_imp · 05-17-2016, 08:06 AM

Capt.,
Which knee/tank pads do you have? I think I would like to have a set like yours.

capttwb136_imp · 05-17-2016, 11:38 AM

(05-17-2016, 08:06 AM)aschem_imp Wrote: Capt.,
Which knee/tank pads do you have? I think I would like to have a set like yours.

http://www.ebay.com/itm/Triumph-Tank-Kne...%3ATriumph

Here you go. I got them on ebay.

(05-17-2016, 03:37 AM)treytexag_imp Wrote: Cap'n, which model number is it? Is it the Emgo Venom Fairing mk 1 or mk 2 or which one did you buy? Please advise sir. Thanks.

[url=http://www.ebay.com/itm/Venom-MK-II-Cafe-Racer-Drag-Racing-Fairing-Windshield-Fits-7-Round-Headlights-/191186649225?hash=item2c839cc089:g:DAYAAOxyx0JTfOO4&vxp=mtr]http://www.ebay.com/itm/Venom-MK-II-Cafe...O4&vxp=mtr

This one. You can find one with free shipping for about 54 dollars.

(05-17-2016, 03:37 AM)treytexag_imp Wrote: Cap'n, which model number is it? Is it the Emgo Venom Fairing mk 1 or mk 2 or which one did you buy? Please advise sir. Thanks.

Trey, did you get my PM?

capttwb136_imp · 05-17-2016, 02:53 PM

(05-17-2016, 03:52 AM)Inhouse Bob_imp Wrote: When using the original headlight bolts, did you put spacers between the headlight brackets and the fairing or bow the fairing in so that the bolts would reach? Or neither? Mine has about a quarter inch between the fairing and the headlight bracket on each side.
I didn't add a bottom brace, but the side bolts seem to hold it firmly enough so as not to rotate at high speed. May add one later.
Thanks for the writeup. I need to be better about sharing

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not.

Inhouse Bob · 05-17-2016, 09:49 PM

(05-17-2016, 02:53 PM)capttwb136_imp Wrote:
(05-17-2016, 03:52 AM)Inhouse Bob_imp Wrote: When using the original headlight bolts, did you put spacers between the headlight brackets and the fairing or bow the fairing in so that the bolts would reach? Or neither? Mine has about a quarter inch between the fairing and the headlight bracket on each side.
I didn't add a bottom brace, but the side bolts seem to hold it firmly enough so as not to rotate at high speed. May add one later.
Thanks for the writeup. I need to be better about sharing

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not.

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not. Thanks!

capttwb136_imp · 05-18-2016, 04:16 AM

(05-15-2016, 05:27 AM)The ferret_imp Wrote: Looking good capt!

Thanks Mickey!

(05-15-2016, 05:51 AM)Cormanus_imp Wrote: Yes. Definitely looking good.

Thanks Cormanus!

(05-17-2016, 02:35 AM)Papa Weeley_imp Wrote: Great looking fairing, really complements the lines of that black bike - glad you could get it to work. Nice looking bike, too!

Thanks Papa!

mattmcuomo@yahoo.com · 05-18-2016, 04:28 AM

Dang you all, making me spend more money on this bike! Lol. I ordered one from Moto Part Hub for $55.55 shipped.

Sent from me......

Lord Popgun · 05-18-2016, 04:44 AM

55 bucks is pocket change on this bike. Tongue

mattmcuomo@yahoo.com · 05-18-2016, 05:03 AM

Agreed. But I'll be replacing my 190 dollar Flyscreen!

Sent from me......

kennyw · 05-18-2016, 04:18 PM

(05-18-2016, 04:28 AM)MMC_imp Wrote: Dang you all, making me spend more money on this bike! Lol. I ordered one from Moto Part Hub for $55.55 shipped.

Sent from me......

I hope your order goes better than the reviews on that place... 7 out of 8 reviews on Google were 1 star.

https://www.google.com/search?q=Moto+Par...21dc43,1,,

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	power port and Samurider Road Comet Fairing 1	tdbru	9	827	05-04-2025, 07:20 PM Last Post: tdbru
	I installed the Emgo Reverse Cone Universal slip on	danieljrmurray_imp	2	279	05-15-2023, 04:29 AM Last Post: 3rd Gear Steve
	Batwing fairing ISO	Griz53_imp	1	248	01-22-2023, 03:11 AM Last Post: mvk24_imp
	Road Comet Fairing	Catbird_imp	47	3,093	08-16-2022, 10:33 PM Last Post: Lord Popgun
	Rebel 500 SE style fairing?	LayerCake_imp	0	217	06-12-2022, 09:03 AM Last Post: LayerCake_imp
	vetter fairing help	Canadianredneck_imp	12	776	03-31-2022, 12:51 PM Last Post: rboe
	road comet fairing	vfrpaul98_imp	75	3,600	10-21-2021, 02:41 AM Last Post: Lord Popgun
	fairing ?	rich_imp	14	858	04-22-2021, 02:13 AM Last Post: 17-CB-002
	Lookey what I got, Emgo Venom Mark ll	mvk24_imp	22	1,123	03-26-2021, 12:36 PM Last Post: mvk24_imp
	Emgo fairing	capttwb136_imp	20	936	03-09-2021, 02:32 PM Last Post: mvk24_imp

Threaded Mode Emgo fairing
Author	Message