Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No more GENMAR risers so now what options?
Author Message
Skypilot_imp Offline
First Service Completed


Posts: 43
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2019
No more GENMAR risers so now what options?
#1

So yes according to several hits on the web and some feedback here it appears the GENMAR is out of business AND has my $$. Problem is that I am still looking for risers and I’m not finding many options. What I’ve seen so far are...

1 The Rox pivoting risers which fit but may or may not cause cable/wiring issues

2 I cannot find any from SW Motech despite the fact that I see that brand a lot around this forum

3 These Zetas that are universal but don’t really give much in the way of info
https://www.revzilla.com/motorcycle/zeta...gJbgvD_BwE

Looking for any other options or input here!


05-05-2019, 10:02 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: No more GENMAR risers so now what options?
#2

https://www.aliexpress.com/item/22mm-Mot...st=ae803_4

https://www.aliexpress.com/wholesale?cat...ser+cb1100

Never had a problem with delivery from this supplier.


05-05-2019, 10:23 AM
Find Reply
Skypilot_imp Offline
First Service Completed


Posts: 43
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2019
RE: No more GENMAR risers so now what options?
#3

Looks just like the Rox thanks for the link. Do you run those risers on your bike?


05-05-2019, 12:11 PM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: No more GENMAR risers so now what options?
#4

(05-05-2019, 12:11 PM)Skypilot_imp Wrote: Looks just like the Rox thanks for the link. Do you run those risers on your bike?

I was thinking about these for my Mule, but I probably don't need them. However if I change my mind, I can likely receive them in two weeks.

I heard the cry for assistance and found these so-called CB versions. I don't use risers on my CB1100.


05-05-2019, 12:27 PM
Find Reply
WRXer_imp Offline
First Service Completed


Posts: 38
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2017
RE: No more GENMAR risers so now what options?
#5

I installed a set of up and back zetas. Added +2 brake lines.


05-05-2019, 12:46 PM
Find Reply
jtopiso_imp Offline
Been There


Posts: 403
Threads: 13
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Oct 2017
RE: No more GENMAR risers so now what options?
#6

I installed these:
https://sw-motech.com/en/products/ergono...040997.htm
No issue with brake lines.


05-05-2019, 04:24 PM
Find Reply
Skypilot_imp Offline
First Service Completed


Posts: 43
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2019
RE: No more GENMAR risers so now what options?
#7

(05-05-2019, 04:24 PM)jtopiso_imp Wrote: I installed these:
https://sw-motech.com/en/products/ergono...040997.htm
No issue with brake lines.

I’ve looked at those but hesitated bc if the weird gap that the motech riser leaves underneath.


05-06-2019, 01:05 AM
Find Reply
pdedse Offline
Moderator


Posts: 2,998
Threads: 118
Likes Received: 654 in 281 posts
Likes Given: 669
Joined: Apr 2025
RE: No more GENMAR risers so now what options?
#8

Hey Skypilot, what weird gap?

Can you ID the gap from the photos from [url=http://cb1100forum.com/forum/showthread.php?tid=8179&highlight=Risers]this thread?


05-06-2019, 01:20 AM
Find Reply
Skypilot_imp Offline
First Service Completed


Posts: 43
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2019
RE: No more GENMAR risers so now what options?
#9

(05-06-2019, 01:20 AM)pdedse_imp Wrote: Hey Skypilot, what weird gap?

Can you ID the gap from the photos from this thread?

Sorry not yours on your bike but the ones in the link you sent. See the second photo

[url=https://www.imageshack.us/i/povpQq8ap]https://www.imageshack.us/i/povpQq8ap


https://www.imageshack.us/i/pnatVBeop
(05-05-2019, 12:46 PM)WRXer_imp Wrote: I installed a set of up and back zetas. Added +2 brake lines.

Did you NEED to add the 2+ brake line or was it piece of mind


05-06-2019, 07:07 AM
Find Reply
pdedse Offline
Moderator


Posts: 2,998
Threads: 118
Likes Received: 654 in 281 posts
Likes Given: 669
Joined: Apr 2025
RE: No more GENMAR risers so now what options?
#10

(05-06-2019, 07:07 AM)Skypilot_imp Wrote:
(05-06-2019, 01:20 AM)pdedse_imp Wrote: Hey Skypilot, what weird gap?

Can you ID the gap from the photos from this thread?

Sorry not yours on your bike but the ones in the link you sent. See the second photo

[url=https://www.imageshack.us/i/povpQq8ap]https://www.imageshack.us/i/povpQq8ap


https://www.imageshack.us/i/pnatVBeop
(05-05-2019, 12:46 PM)WRXer_imp Wrote: I installed a set of up and back zetas. Added +2 brake lines.

Did you NEED to add the 2+ brake line or was it piece of mind

OK, I see that gap in the photo, but that's a different set than what I purchased, which leave no gap. I'll check on part number for what I bought.


05-06-2019, 09:12 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  VOIGT Risers Duderino_imp 3 331 11-23-2024, 01:09 AM
Last Post: Obleo
  Windscreen Options? Yata-Garasu_imp 97 4,828 06-12-2024, 02:20 AM
Last Post: maciejman_imp
  Front fender options Azika_imp 29 2,412 11-17-2022, 02:52 PM
Last Post: Azika_imp
  Handlebar Risers?? bubblerboy64_imp 16 1,078 07-16-2022, 06:04 AM
Last Post: calipo223_imp
   Tank Guard Options Yata-Garasu_imp 11 531 05-18-2022, 08:11 AM
Last Post: Lord Popgun
  Luggage Rack Options Yata-Garasu_imp 25 1,872 11-27-2021, 02:13 PM
Last Post: GoldOxide_imp
   Handle Grip Options Yata-Garasu_imp 24 1,284 10-26-2021, 11:28 AM
Last Post: rboe
  ROX Risers and longer brake line? MrBob_imp 3 317 06-14-2021, 12:19 AM
Last Post: MrBob_imp
  Rizoma risers on the cb1100 Zee9_imp 20 1,126 05-28-2021, 02:20 PM
Last Post: Zee9_imp
  HANDLEBAR RISERS - is really necessary??? Alfgaxatico_imp 19 1,046 12-16-2020, 10:40 PM
Last Post: GoldOxide_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)