+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: No more GENMAR risers so now what options? (/showthread.php?tid=8588)
No more GENMAR risers so now what options? - Skypilot_imp - 05-05-2019
So yes according to several hits on the web and some feedback here it appears the GENMAR is out of business AND has my $$. Problem is that I am still looking for risers and I’m not finding many options. What I’ve seen so far are...
1 The Rox pivoting risers which fit but may or may not cause cable/wiring issues
2 I cannot find any from SW Motech despite the fact that I see that brand a lot around this forum
3 These Zetas that are universal but don’t really give much in the way of info
https://www.revzilla.com/motorcycle/zeta-78-offset-handlebar-risers?gclid=EAIaIQobChMI8r_UvMWF4gIVlISzCh3kZAb1EAQYAiABEgJbgvD_BwE
Looking for any other options or input here!
RE: No more GENMAR risers so now what options? - GoldOxide_imp - 05-05-2019
https://www.aliexpress.com/item/22mm-Motorcycle-Handlebars-Fat-Bar-Mount-Clamps-Risers-For-HONDA-CB300-CB500-CB1000-CB1100-CB1300-2003/32857893059.html?spm=2114.search0104.3.22.761943b119xU6F&ws_ab_test=searchweb0_0,searchweb201602_7_10065_10068_10130_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_10083_454_10103_10618_10307_537_536,searchweb201603_52,ppcSwitch_0&algo_expid=2b4fe2dd-3a31-4288-9b9d-f68503306885-3&algo_pvid=2b4fe2dd-3a31-4288-9b9d-f68503306885&transAbTest=ae803_4
https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20190505162223&SearchText=riser+cb1100
Never had a problem with delivery from this supplier.
RE: No more GENMAR risers so now what options? - Skypilot_imp - 05-05-2019
Looks just like the Rox thanks for the link. Do you run those risers on your bike?
RE: No more GENMAR risers so now what options? - GoldOxide_imp - 05-05-2019
(05-05-2019, 12:11 PM)Skypilot_imp Wrote: Looks just like the Rox thanks for the link. Do you run those risers on your bike?
I was thinking about these for my Mule, but I probably don't need them. However if I change my mind, I can likely receive them in two weeks.
I heard the cry for assistance and found these so-called CB versions. I don't use risers on my CB1100.
RE: No more GENMAR risers so now what options? - WRXer_imp - 05-05-2019
I installed a set of up and back zetas. Added +2 brake lines.
RE: No more GENMAR risers so now what options? - jtopiso_imp - 05-05-2019
I installed these:
https://sw-motech.com/en/products/ergonomics/handlebar/bar+back/4052572040997.htm
No issue with brake lines.
RE: No more GENMAR risers so now what options? - Skypilot_imp - 05-06-2019
(05-05-2019, 04:24 PM)jtopiso_imp Wrote: I installed these:
https://sw-motech.com/en/products/ergonomics/handlebar/bar+back/4052572040997.htm
No issue with brake lines.
I’ve looked at those but hesitated bc if the weird gap that the motech riser leaves underneath.
RE: No more GENMAR risers so now what options? - pdedse - 05-06-2019
Hey Skypilot, what weird gap?
Can you ID the gap from the photos from [url=http://cb1100forum.com/forum/showthread.php?tid=8179&highlight=Risers]this thread?
RE: No more GENMAR risers so now what options? - Skypilot_imp - 05-06-2019
(05-06-2019, 01:20 AM)pdedse_imp Wrote: Hey Skypilot, what weird gap?
Can you ID the gap from the photos from this thread?
Sorry not yours on your bike but the ones in the link you sent. See the second photo
[url=https://www.imageshack.us/i/povpQq8ap]https://www.imageshack.us/i/povpQq8ap
https://www.imageshack.us/i/pnatVBeop
(05-05-2019, 12:46 PM)WRXer_imp Wrote: I installed a set of up and back zetas. Added +2 brake lines.
Did you NEED to add the 2+ brake line or was it piece of mind
RE: No more GENMAR risers so now what options? - pdedse - 05-06-2019
(05-06-2019, 07:07 AM)Skypilot_imp Wrote:(05-06-2019, 01:20 AM)pdedse_imp Wrote: Hey Skypilot, what weird gap?
Can you ID the gap from the photos from this thread?
Sorry not yours on your bike but the ones in the link you sent. See the second photo
[url=https://www.imageshack.us/i/povpQq8ap]https://www.imageshack.us/i/povpQq8ap
https://www.imageshack.us/i/pnatVBeop
(05-05-2019, 12:46 PM)WRXer_imp Wrote: I installed a set of up and back zetas. Added +2 brake lines.
Did you NEED to add the 2+ brake line or was it piece of mind
OK, I see that gap in the photo, but that's a different set than what I purchased, which leave no gap. I'll check on part number for what I bought.