Yoshimura RSCV Full Exhaust System

[chrisross_imp]

This is exactly the problem I ran into. I don't have pictures because my bike is center standless and I'm not going to go attempt to put it back together to show how it won't. I cut a giant notch out of my stop to let the c clip through, and that didn't even work right. The center stand has extra bracing that prevent the stand from contacting the stop. I would really like to see the customer's that made it work, because I really don't like not having a center stand.

[hondahoarder_imp]

We need pics when you get them on

[chrisross_imp]

Don't look to me anytime soon. I've been extremely busy for the last couple of months. The exhaust actually came in probably 6 weeks ago and I've been working on it as time permits...and I just now concluded it won't work. I'm going to leave it off for awhile so I can enjoy the bike and I may plan a second round of attack at some point.

[SlewisCB1100_imp]

Hi I'm mulling over installing the Yoshimura RSCV full Exhaust System and was wondering if anybody had any feed back or if I should be in a different direction?
Also looking for any comments about sound install ect.

Thanks for your Time.

The RSCV fits great and performance of the bike is much improved. Don't be disappointed if it is not as loud as you might have thought. It is actually quiet. I recommend it and have included a picture of my 2013.



Good luck and I hope this helps!

[Randy B]

[Razor]

Ordered the Yoshimura exhaust. Tracking # has it here by next Wednesday. I know the center stand bracket only fits the 2013 models. I'll post some pics, and hopefully how to modify the bracket to fit the 2014 Std. Stay tuned...

[d33J_imp]

Hey there. It's not my intent to highjack the thread, but I didn't see a specific sub forum to post items for sale or links. Figured some folks might be interested in a practically brand new RSCV exhaust just listed on fleaBay here - [url=http://www.ebay.com/itm/Yoshimura-Honda-CB1100-2013-Race-RSCV-Full-Stainless-Steel-Exhaust-System-Black-/171457332482?pt=Motorcycles_Parts_Accessories&hash=item27eba74502&vxp=mtr]http://www.ebay.com/itm/Yoshimura-Honda-...02&vxp=mtr

Please excuse the interruption. Thanks!

[Cormanus]

d33J, try [url=http://cb1100forum.com/forum/forumdisplay.php?fid=21]here.

Cheers and welcome. Why not tell us about yourself in the New Members section [url=http://cb1100forum.com/forum/forumdisplay.php?fid=6]here?

[Razor]

Received & installed the exhaust. As previously mentioned and I thought there was another post detailing why the supplied center stand bracket doesn't work for the 2014 CB1100 (Std. model, not sure about the others).

The 2014 center stand return springs were relocated from the side to the center.
Here's the stand out with Yoshimura bracket, and return springs. The springs will hit the stand when it retracts. Others have cut the bracket in two pieces leaving enough room for the springs. Not sure how that will hold up over time.



Here's a shot without the springs, loosely on the bike



At this point I'm leaving the center stand off, and will likely add this to the winter project list. Initial thoughts include some sort of stop/bracket that utilizes the stock center exhaust support (not used for the Yoshimura system).

Really like the exhaust. Not loud, but has the look & throaty sound I was after.

[CIP57_imp]

It sure does have the look, much better match than stock on that bike.