Login

Stealth128_imp · 08-06-2014, 01:09 PM

Hi I'm mulling over installing the Yoshimura RSCV full Exhaust System and was wondering if anybody had any feed back or if I should be in a different direction?
Also looking for any comments about sound install ect.

Thanks for your Time.

CIP57_imp · 08-06-2014, 09:43 PM

(08-06-2014, 01:09 PM)Stealth128_imp Wrote: Hi I'm mulling over installing the Yoshimura RSCV full Exhaust System and was wondering if anybody had any feed back or if I should be in a different direction?
Also looking for any comments about sound install ect.

Thanks for your Time.

I have this exhaust installed. With the stock PC5 you can expect a full second gain 0-100 and a better air/fuel ratio. I have a perfect a/f ratio at about 13 through the intire range. The exhaust is not loud just a bit deeper. Install is not bad about 1 hour for centerstand stop and 2 for exhaust.

shdwghst457_imp · 08-07-2014, 02:31 AM

It is compatible with the center stand, right?

CIP57_imp · 08-07-2014, 06:37 AM

(08-07-2014, 02:31 AM)shdwghst457_imp Wrote: It is compatible with the center stand, right?

Yes, just need to install the stop

chrisross_imp · 08-07-2014, 08:37 AM

It's compatible with 2013 bikes, but not with 2014.

Stealth128_imp · 08-10-2014, 09:52 AM

(08-06-2014, 09:43 PM)CIP57_imp Wrote:
(08-06-2014, 01:09 PM)Stealth128_imp Wrote: Hi I'm mulling over installing the Yoshimura RSCV full Exhaust System and was wondering if anybody had any feed back or if I should be in a different direction?
Also looking for any comments about sound install ect.

Thanks for your Time.

I have this exhaust installed. With the stock PC5 you can expect a full second gain 0-100 and a better air/fuel ratio. I have a perfect a/f ratio at about 13 through the intire range. The exhaust is not loud just a bit deeper. Install is not bad about 1 hour for centerstand stop and 2 for exhaust.

I have this exhaust installed. With the stock PC5 you can expect a full second gain 0-100 and a better air/fuel ratio. I have a perfect a/f ratio at about 13 through the intire range. The exhaust is not loud just a bit deeper. Install is not bad about 1 hour for centerstand stop and 2 for exhaust.
Thank you for your reply! Great detailed information answered all my questions and some. I'll place my order in tomorrow morning.
Thanks,

Stealth 128

Randy B · 08-10-2014, 08:40 PM

(08-07-2014, 08:37 AM)chrisross_imp Wrote: It's compatible with 2013 bikes, but not with 2014.

Is this true for the std as well as the EX/DLX?

Razor · 08-10-2014, 09:05 PM

(08-10-2014, 08:40 PM)Randy B_imp Wrote:
(08-07-2014, 08:37 AM)chrisross_imp Wrote: It's compatible with 2013 bikes, but not with 2014.

Is this true for the std as well as the EX/DLX?

Is this true for the std as well as the EX/DLX?
Good question. Im also interested. Thanks!

chrisross_imp · 08-10-2014, 09:39 PM

Can't confirm ex (unless it's the exact same as the dlx), but the stop is not compatible with the 14 std or dlx. I have a thread about it. Had I known id be losing my center stand, I'd have gotten a different exhaust.

Razor · 08-11-2014, 06:17 AM

(08-10-2014, 09:39 PM)chrisross_imp Wrote: Can't confirm ex (unless it's the exact same as the dlx), but the stop is not compatible with the 14 std or dlx. I have a thread about it. Had I known id be losing my center stand, I'd have gotten a different exhaust.

Curiosity got the best of me. Emailed Yoshimura. Don Franzen responded right back.
Here's his response:

Hello Ray,

We have only made that exhaust for the 2013 model of the CB1100. For the 2014 version, Honda has changed the frame where the centerstand mounts. On the 13 the spring for the stand is on the side, and the 14 moves it to the center. At this time, we have not made any plans to update our bracket for the stand. But I have seen customers make their own modification to our bracket, and it works fine on the bike once it has been modified. Let me know if you have any other questions.

Thank you,
Don

<image003.jpg>
Don Franzen

Yoshimura R & D of America, Inc.
5420 Daniels Street
Chino, Ca. 91710
Phone: (800) 634-9166 Ext. 422
Fax: (909) 591-2198
dfranzen@yoshimura-rd.com
http://www.yoshimura-rd.com

-------------------------------------------
Chris, let me know what your thoughts are. Is this what you ran into. Any chance you got some pics? Thanks

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Yoshimura RS3 replacement for an '13	Jurlie_imp	7	488	07-28-2024, 01:47 PM Last Post: Glockrocks83_imp
	Exhaust system/slip-on	johnny_elpino_imp	26	1,596	05-26-2023, 01:06 AM Last Post: kzoorue_imp
	Dart flyscreen and a little Yoshimura stain magic	1985CB450_imp	19	1,377	10-24-2022, 04:12 AM Last Post: 1985CB450_imp
	Installation of a Smart Turn System [No Cut Mod]	LayerCake_imp	20	1,368	06-15-2022, 01:28 AM Last Post: KiowaEagle_imp
	PCV with full exhaust worth getting tune??	gretle_2.0	4	344	05-24-2022, 03:43 AM Last Post: gretle_2.0
	Arrow full exhaust	gretle_2.0	2	259	05-17-2022, 11:38 AM Last Post: GoldOxide_imp
	Moriwaki 4 into 1 full pipe	GS1100_imp	9	513	01-30-2022, 12:59 PM Last Post: rich_imp
	full delkevic exhaust	outback_imp	27	1,555	01-14-2022, 11:12 AM Last Post: GoldOxide_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	862	01-05-2022, 10:54 PM Last Post: Nibis_imp
	DLX Exhaust System Conversion	Ron in MO_imp	28	1,326	08-26-2021, 10:50 AM Last Post: bvictory_imp

Threaded Mode Yoshimura RSCV Full Exhaust System
Author	Message