05-23-2020, 05:06 PM
The screw in the top of the terminal had started working loose. I suspect it probably was as at least as loose as the one in the video.
My meter consistently showed 0.00 for the lower reading and I did wiggle things about a bit and it made no difference. However, I'll have another go tomorrow and see what happens. I should also be able to take it for a run and see whether tightening the terminal has fixed it.
My meter consistently showed 0.00 for the lower reading and I did wiggle things about a bit and it made no difference. However, I'll have another go tomorrow and see what happens. I should also be able to take it for a run and see whether tightening the terminal has fixed it.

