The CB1100 Community Forum › Honda CB1100 Discussions › General Discussion v
About to order the '17 dual bending valve forks for my '14

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
About to order the '17 dual bending valve forks for my '14
pekingduck Offline
Road Warrior
Posts: 1,672
Threads: 41
Likes Received: 140 in 67 posts
Likes Given: 39
Joined: Apr 2014
#49
08-18-2020, 04:28 AM
(08-18-2020, 01:54 AM)Houtman_imp Wrote: They fit on the 2014 but NOT on the 2013 with ABS ( I tried but brakes are different)

Well, you could. The right fork slider are different for the 3-piston caliper on the 2013 ABS, but the internals should swap over easily enough. The fork sliders are just machined tubes, same inside diameter. The fork bushings are the same part numbers too.

Most of the magic happens inside the fork tube itself, in the damper rod valving. Plus different rate springs, and maybe lower friction fork seals. It may be even possible to swap just the damper rods and springs, and use the existing fork tube, if its I.D. is the same.
Find
Reply


Messages In This Thread
RE: About to order the '17 dual bending valve forks for my '14 - by pekingduck_imp - 08-18-2020, 04:28 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve clearance price Maturecheese_imp 44 3,917 03-05-2024, 07:11 AM
Last Post: Gone in 60
  Whoa- this CB1100 dropped a valve seat- PowerDubs_imp 13 1,296 10-23-2023, 11:43 AM
Last Post: 1973cb750
  Still lookin for that valve cover..... FLYTYM_imp 0 195 10-28-2020, 07:34 PM
Last Post: FLYTYM_imp
  Valve Extensions rbike_imp 4 440 09-16-2020, 01:48 AM
Last Post: Gone in 60
  still going to play with the front forks ohiorider_imp 5 545 08-13-2019, 09:31 AM
Last Post: peterbaron
  CB1100 Dealer Order Availability In The US suhawk305 30 2,286 10-22-2018, 07:52 AM
Last Post: apex1_imp
  Thought I was done with the CB - trying again (forks) ohiorider_imp 80 5,728 09-30-2018, 11:20 AM
Last Post: LongRanger_imp
  Revised valve clearance check interval ohiorider_imp 28 1,911 02-23-2018, 08:38 PM
Last Post: jtopiso_imp
  Where do you order your OEM parts from? jdvalero_imp 9 610 11-07-2017, 04:38 AM
Last Post: rozbabbo1100_imp
  Be carefull what you order from Amazon jdvalero_imp 10 781 10-29-2017, 03:19 AM
Last Post: Chris Goldson_imp

Forum Jump:


Users browsing this thread: 4 Guest(s)