Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
About to order the '17 dual bending valve forks for my '14
#31
(01-17-2018, 01:24 PM)EmptySea_imp Wrote: Found your thread... This is pretty interesting. Did the mod change the amount of dive under braking? Also, and I may have missed this, what was the approximate cost of the replacement forks?
$438/side, $872 for the whole setup. Probably a few fasteners, fork oil, etcetera as well. Figure $1000.

As to the kits such as Racetech etc., the SDBV fork is a whole 'nother animal. A kit installed in the old forks will improve things but it's like a bandaid.

The new fork is a new, well-integrated system so well worth the money if one is really serious about a HUGE improvement.

But the kits can be had for about half that money and are pretty good.
Reply


Messages In This Thread
RE: About to order the '17 dual bending valve forks for my '14 - by Ulvetanna_imp - 01-17-2018, 04:06 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve clearance price Maturecheese_imp 44 3,894 03-05-2024, 07:11 AM
Last Post: Gone in 60
  Whoa- this CB1100 dropped a valve seat- PowerDubs_imp 13 1,296 10-23-2023, 11:43 AM
Last Post: 1973cb750
  Still lookin for that valve cover..... FLYTYM_imp 0 194 10-28-2020, 07:34 PM
Last Post: FLYTYM_imp
  Valve Extensions rbike_imp 4 435 09-16-2020, 01:48 AM
Last Post: Gone in 60
  still going to play with the front forks ohiorider_imp 5 543 08-13-2019, 09:31 AM
Last Post: peterbaron
  CB1100 Dealer Order Availability In The US suhawk305 30 2,283 10-22-2018, 07:52 AM
Last Post: apex1_imp
  Thought I was done with the CB - trying again (forks) ohiorider_imp 80 5,718 09-30-2018, 11:20 AM
Last Post: LongRanger_imp
  Revised valve clearance check interval ohiorider_imp 28 1,900 02-23-2018, 08:38 PM
Last Post: jtopiso_imp
  Where do you order your OEM parts from? jdvalero_imp 9 606 11-07-2017, 04:38 AM
Last Post: rozbabbo1100_imp
  Be carefull what you order from Amazon jdvalero_imp 10 781 10-29-2017, 03:19 AM
Last Post: Chris Goldson_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)