06-02-2021, 08:46 AM
it is not sticking out. tried speed out but bolt broke off so nasty it would not center punch and drill wouldn't go in straight either. just boogered it up worse and broke drill bit off in bolt! ordered a used wheel for $300. a rotor would have cost that. these rotors are fine though. put back on with just the 4 bolts to test slow speed stop, which is where the problem was. it's gone! flipping the springs that were backwards on the one rotor fixed it. now smooth as glass! wish I had test ridden after flipping the springs on the one side. the springs on the second side where bolt broke were on correctly!
I bet a lot of folk that think they have warped rotors really have springs on backwards!!
I bet a lot of folk that think they have warped rotors really have springs on backwards!!
