06-16-2021, 04:43 PM
I was checking my led indicators after a ride yesterday with the four way flashers on and front pair ok and very bright but on checking the rear the left was very dim and the further I walked back it was barely visible so on a closer look found both rear indicators loose and the left had turned slightly downwards but was working fine.
The leds are very dependant on line of sight so although working ok they need to be in the right position.
Simple, I thought the bolts had worked loose but no they are very tight and at the end of their travel so they are designed to be loose in case of getting caught with a foot I guess.
I didn't have time to do anything else but will look again today and maybe install a washer to hold them in place better?
Anyone with these type indicators please check the rear ones as they need to be in the right position to be seen.
[url=https://postimg.cc/TLRCSg6V]![[Image: 75b5878837b0202eea990b4ba027bd94.jpg]](https://cb1100forum.net/forum/uploads/imp/202106/75b5878837b0202eea990b4ba027bd94.jpg)
The leds are very dependant on line of sight so although working ok they need to be in the right position.
Simple, I thought the bolts had worked loose but no they are very tight and at the end of their travel so they are designed to be loose in case of getting caught with a foot I guess.
I didn't have time to do anything else but will look again today and maybe install a washer to hold them in place better?
Anyone with these type indicators please check the rear ones as they need to be in the right position to be seen.
[url=https://postimg.cc/TLRCSg6V]