07-08-2021, 08:44 PM
(07-08-2021, 12:43 PM)DougsZ28_imp Wrote:(07-06-2021, 09:40 PM)GoldOxide_imp Wrote:(07-06-2021, 09:36 PM)DougsZ28_imp Wrote:(07-06-2021, 12:28 PM)GoldOxide_imp Wrote:(07-06-2021, 12:16 PM)LongRanger_imp Wrote: If you’re not doing so already, try lightly preloading the shift lever before disengaging the clutch. Then, when you’re ready to shift, disengage the clutch while continuing to preload the shifter and you might find the gears changing more smoothly.
(+1) for the LongRanger.
(+1) for the LongRanger. I'll give it a try, thanks!
Yeah, I would say it has by far the biggest impact on improved smoothness.
A secondary change for myself was the oil:
Motul 5100 or Rotella T6 10W40.
Hard to describe, but smoother than a blunt hot knife sliding down a brick of fresh, farm dairy butter.
Yeah, I would say it has by far the biggest impact on improved smoothness.
A secondary change for myself was the oil:
Motul 5100 or Rotella T6 10W40.
Hard to describe, but smoother than a blunt hot knife sliding down a brick of fresh, farm dairy butter. Thats the cure, I went to a 5-20 synthetic and it cured the problem! Thanks
Yeah, I would say it has by far the biggest impact on improved smoothness.
A secondary change for myself was the oil:
Motul 5100 or Rotella T6 10W40.
Hard to describe, but smoother than a blunt hot knife sliding down a brick of fresh, farm dairy butter. Thats the cure, I went to a 5-20 synthetic and it cured the problem! Thanks
I do not know your climate but 5/20 seems very low !