03-22-2022, 12:27 PM
You could use a spirit level to check for parallel legs, not by using the bubble but the broad straight edge of the tool.
A decent quality one will give accurate results when held against the fork legs, if it tips slightly when held against one leg and then the other they are out of parallel.
This could give you a way to assess the amount and direction if you have not done so already.
In addition to this you could try to put shims under the clamps, either in the lower or upper half of the clamps, alu can makes a good size shim, use your favorite brand and shape with scissors as required.
Hope that helps.
A decent quality one will give accurate results when held against the fork legs, if it tips slightly when held against one leg and then the other they are out of parallel.
This could give you a way to assess the amount and direction if you have not done so already.
In addition to this you could try to put shims under the clamps, either in the lower or upper half of the clamps, alu can makes a good size shim, use your favorite brand and shape with scissors as required.
Hope that helps.