Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Checking valve clearances
#60
My epiphany on service work came back in the mid 1980’s on my newly purchased ‘83 GS750ED Suzuki. The initial 600 mile service was stressed by the selling dealer as extremely important and vital to keeping the factory warranty in place. I was a poor kid at the time and the cost was rather substantial but I wanted it done right so off to the dealer it went.

Several weeks later I was cleaning the bike and after removing the tank and side panels I noticed several fasteners either loose or altogether missing. Knowing the bike did not come from Suzuki missing fasteners, at that time I committed to getting a factory service manual and doing my own work. No one is ever going to take the time and care doing work on your bike like you would. Take your time, read up on the procedures in advance, ask questions when needed and remember it’s not rocket science.
People are human and we all make mistakes but the tech mentioned above did not make a mistake. He lied and tried to cheat a customer…. big difference and regardless of staffing issues he should have been shown the door on the way out…
Reply


Messages In This Thread
Checking valve clearances - by Maturecheese_imp - 11-28-2022, 01:37 AM
RE: Checking valve clearances - by the Ferret - 11-28-2022, 01:55 AM
RE: Checking valve clearances - by Dave_imp - 11-29-2022, 05:21 AM
RE: Checking valve clearances - by Gone in 60 - 11-30-2022, 02:38 AM
RE: Checking valve clearances - by DrewNJ_imp - 12-07-2022, 08:01 AM
Checking valve clearances - by MMC_imp - 12-07-2022, 08:28 AM
RE: Checking valve clearances - by peterbaron - 12-07-2022, 10:55 AM
RE: Checking valve clearances - by DrewNJ_imp - 12-07-2022, 11:19 AM
RE: Checking valve clearances - by peterbaron - 12-07-2022, 11:27 AM
RE: Checking valve clearances - by Wisedrum - 12-07-2022, 07:01 PM
RE: Checking valve clearances - by Mixagon_imp - 12-07-2022, 08:36 PM
RE: Checking valve clearances - by Haystack_imp - 12-08-2022, 09:57 AM
RE: Checking valve clearances - by pdedse - 12-08-2022, 09:59 AM
RE: Checking valve clearances - by Haystack_imp - 12-08-2022, 10:05 AM
RE: Checking valve clearances - by max - 12-08-2022, 10:10 AM
RE: Checking valve clearances - by the Ferret - 12-08-2022, 10:40 AM
RE: Checking valve clearances - by peterbaron - 12-08-2022, 12:43 PM
RE: Checking valve clearances - by Gone in 60 - 12-08-2022, 02:34 PM
Checking valve clearances - by Mtneers - 12-08-2022, 10:57 PM
RE: Checking valve clearances - by DrewNJ_imp - 12-08-2022, 11:37 PM
RE: Checking valve clearances - by the Ferret - 12-09-2022, 01:14 AM
RE: Checking valve clearances - by max - 12-09-2022, 02:02 AM
Checking valve clearances - by PowerDubs_imp - 12-09-2022, 06:27 AM
RE: Checking valve clearances - by peterbaron - 12-09-2022, 07:35 AM
RE: Checking valve clearances - by Wisedrum - 12-09-2022, 08:18 AM
RE: Checking valve clearances - by Tev62 - 12-09-2022, 07:51 PM
RE: Checking valve clearances - by the Ferret - 12-10-2022, 12:08 AM
RE: Checking valve clearances - by the Ferret - 12-10-2022, 01:33 AM
RE: Checking valve clearances - by DrewNJ_imp - 12-10-2022, 01:36 AM
RE: Checking valve clearances - by Enzofour_imp - 12-10-2022, 03:14 AM
RE: Checking valve clearances - by Gone in 60 - 12-10-2022, 04:56 AM
RE: Checking valve clearances - by max - 12-10-2022, 06:24 AM
RE: Checking valve clearances - by DrewNJ_imp - 12-10-2022, 06:38 AM
RE: Checking valve clearances - by Cormanus - 12-10-2022, 07:09 AM
RE: Checking valve clearances - by Dave_imp - 12-10-2022, 07:29 AM
RE: Checking valve clearances - by the Ferret - 12-10-2022, 07:36 AM
RE: Checking valve clearances - by pdedse - 12-10-2022, 07:53 AM
RE: Checking valve clearances - by the Ferret - 12-10-2022, 11:47 AM
RE: Checking valve clearances - by Gone in 60 - 12-10-2022, 12:54 PM
RE: Checking valve clearances - by pdedse - 12-10-2022, 03:13 PM
RE: Checking valve clearances - by 1985CB450_imp - 12-11-2022, 01:44 AM
RE: Checking valve clearances - by Enzofour_imp - 12-11-2022, 02:03 AM
RE: Checking valve clearances - by Gone in 60 - 12-11-2022, 03:35 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 06:58 AM
RE: Checking valve clearances - by the Ferret - 12-11-2022, 08:57 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 08:58 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 09:26 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 09:35 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 09:53 AM
RE: Checking valve clearances - by peterbaron - 12-11-2022, 12:25 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve Adjustment Shims dave 13 614 07-28-2026, 12:49 PM
Last Post: MagnaRider
  Valve Adjustment and Camshaft Removal dave 5 581 03-21-2026, 04:49 PM
Last Post: Cormanus
  Valve Adjustment dave 6 825 08-29-2025, 10:46 AM
Last Post: dave
  Valve Cover Baffle lining ? bflint 6 875 07-26-2025, 11:27 AM
Last Post: bflint
  Valve Adjustment Intervals CBRider_imp 32 2,642 04-21-2025, 02:24 PM
Last Post: Jurlie_imp
  Valve Adjustment Tolerances - How Far Do You Go? dave 14 1,431 10-18-2023, 09:28 PM
Last Post: The Gecko_imp
  Observed Valve Clearance Cormanus 16 1,327 03-06-2023, 09:03 AM
Last Post: Tejas_imp
  The OBSERVED Valve Clearance thread Pterodactyl_imp 162 11,469 12-27-2022, 08:35 AM
Last Post: Cormanus
  Valve noise (i think) Maturecheese_imp 6 567 07-08-2022, 03:41 AM
Last Post: 1973cb750
  valve adjustment jimgl3_imp 44 2,848 06-03-2021, 11:38 AM
Last Post: GoldOxide_imp

Forum Jump:


Users browsing this thread: 2 Guest(s)