07-31-2019, 06:45 PM
Hi all, I am tommy and i am new here. recently I have just done VC and found the following
Cyl 1:
Ex
0.30, 0.31
In
0.18,0.18
Cyl 2:
Ex
0.30, 0.30
In
0.18, 0.18
Cyl 3:
Ex
0.30, 0.30
In
0.15, 0.15
Cyl 4:
Ex
0.28, 0.30
In
0.15, 0.18
Just wondering if the valve clearance will increase or decrease over time since most of my exhaust valve is on the loose side. Also what's the torque for 4 bolts on the camshaft cap? I have popped a cylinder head cover bolt and have to remove the camshaft cap to machine and remove the broken stud. due to that experience, i just tighten the camshaft cap lightly due to fear of another broken bolt. so are all cylinder head cover bolts, just slightly hand tighten.
Cyl 1:
Ex
0.30, 0.31
In
0.18,0.18
Cyl 2:
Ex
0.30, 0.30
In
0.18, 0.18
Cyl 3:
Ex
0.30, 0.30
In
0.15, 0.15
Cyl 4:
Ex
0.28, 0.30
In
0.15, 0.18
Just wondering if the valve clearance will increase or decrease over time since most of my exhaust valve is on the loose side. Also what's the torque for 4 bolts on the camshaft cap? I have popped a cylinder head cover bolt and have to remove the camshaft cap to machine and remove the broken stud. due to that experience, i just tighten the camshaft cap lightly due to fear of another broken bolt. so are all cylinder head cover bolts, just slightly hand tighten.