01-07-2018, 10:22 PM
(01-07-2018, 02:42 PM)Dave_imp Wrote: SportsterDoc may have just solved the high/low idle mystery! I checked the hose clamps on the throttle bodies today and all eight were loose! Two of them I turned the screws about three full revolutions before achieving an acceptable tightness! I rode the bike about 100 miles after tightening the clamps and it ran perfectly! Most of the miles were on the freeway, but I came to a full stop and put the bike in neutral no less than twenty times today, and each and every time it immediately returned to a perfect 1050 RPM idle! Before I can declare my idle issue is completely cured I must put more miles on the bike, and do some in town, slow speed, stop and go riding, and for a thorough test, I need to perform the in town riding in elevated temperatures. I will perform addition tests ASAP (hopefully next weekend), and report back. I urge any of you guys who are experiencing the idle problem to check your throttle body hose clamps, as SportsterDoc has been recommending.That is great news Dave , I know you probably would not like to do this but see if you loosen them again would the poor idle return ?
If you do this take a screw driver with you to tighten them while on the road after your "test"