12-05-2017, 10:57 AM
Doc,
EOT—in the DTC index (fault codes) there are 2 for the EOT. One is EOT sensor circuit high voltage (more than 4.93v) and one for low voltage (less than 0.04v)
TP sensor—one for low voltage (less than 0.3v) and one for high voltage (more than 4.93v)
IAT sensor—one for low voltage (less than 0.07v) and one for high voltage (more than 4.93V)
MAP sensor- one for low voltage (less than 0.2v) and one for high voltage (3.9v). One fault is for hose connection, no values of anything on the DTC list.
As for the TPS troubleshooting and checks, there are 3 pages of steps. I’m not typing all that. Check your PM.
EOT—in the DTC index (fault codes) there are 2 for the EOT. One is EOT sensor circuit high voltage (more than 4.93v) and one for low voltage (less than 0.04v)
TP sensor—one for low voltage (less than 0.3v) and one for high voltage (more than 4.93v)
IAT sensor—one for low voltage (less than 0.07v) and one for high voltage (more than 4.93V)
MAP sensor- one for low voltage (less than 0.2v) and one for high voltage (3.9v). One fault is for hose connection, no values of anything on the DTC list.
As for the TPS troubleshooting and checks, there are 3 pages of steps. I’m not typing all that. Check your PM.