12-05-2017, 05:54 AM
Pending more info on the EOT, I've been researching information on the TPS, such as resistance values. Hopefully they are in the factory service manual.
Also checking for a source for the TPS, since Honda does not seem to sell it, other than with the full throttle body unit. No success, thus far. The TPS unit on my 2014 is a Keihin JT6H 40226.
JT6H is Keihin's designation for a throttle position sensor.
Found nothing on the 40226 unit.
It may be common to another Honda, but I've found nothing to cross.
Without input on data from members with idle issues, I am not finding much else to be of possible help.
Meanwhile, potential for a vacuum leak includes
8 clamp bolts (8 mm/Phillips head) for throttle body to head clamps
4 rubber intake boots
9 vacuum hoses
1 four way vacuum fitting
1 five way vacuum fitting
Also checking for a source for the TPS, since Honda does not seem to sell it, other than with the full throttle body unit. No success, thus far. The TPS unit on my 2014 is a Keihin JT6H 40226.
JT6H is Keihin's designation for a throttle position sensor.
Found nothing on the 40226 unit.
It may be common to another Honda, but I've found nothing to cross.
Without input on data from members with idle issues, I am not finding much else to be of possible help.
Meanwhile, potential for a vacuum leak includes
8 clamp bolts (8 mm/Phillips head) for throttle body to head clamps
4 rubber intake boots
9 vacuum hoses
1 four way vacuum fitting
1 five way vacuum fitting