10-16-2014, 11:27 AM
(10-16-2014, 07:08 AM)The ferret_imp Wrote: Jsinher..to do what with the front wheel?
(10-16-2014, 07:33 AM)lola_imp Wrote:(10-16-2014, 06:24 AM)jsinher3_imp Wrote: hey what are you guys using to lift the bike up at the front, i dont have space for a actual bike lift.. can i do it with a car jack?
Yes you can.. So with the bike on the rear stand Look for the two tabs below on the Oil Pan and use those as lift points for any common car scissor jack with a piece of wood to lift the front end of the bike.
Yes you can.. So with the bike on the rear stand Look for the two tabs below on the Oil Pan and use those as lift points for any common car scissor jack with a piece of wood to lift the front end of the bike.
(10-16-2014, 10:01 AM)Flynrider_imp Wrote: I've got a small rolling floor jack that I use for all of my bikes. With the CB11 on the center stand, it doesn't take much to lift the front end using the floor jack on the oil pan.
The small ones are fairly cheap and very convenient to have around.
thanks guys, im getting ready to install the fork bellows and possibly to hold up the motor while install some sliders