08-06-2015, 04:45 AM
I have had excellent results with ACF-50 anti corrosion spray; especially on my KTM dirtbike that is always covered with wet mud.
Wash and dry the bike well (I dry the bike as well as I can then sit it out in direct sunlight to dry out every nook and cranny). Soak the aerosol can in hot (not boiling!) water for a few minutes to allow the product to come out in a more fine mist, spray a couple of LIGHT (key word is LIGHT!) coats on the bike and the bike is protected for a few months!
AVOID TIRES, BRAKE ROTORS, CALIPERS AND BRAKE PADS! (I wrap them in Saran wrap)
http://learchem.com/products/acf-50.html
Wash and dry the bike well (I dry the bike as well as I can then sit it out in direct sunlight to dry out every nook and cranny). Soak the aerosol can in hot (not boiling!) water for a few minutes to allow the product to come out in a more fine mist, spray a couple of LIGHT (key word is LIGHT!) coats on the bike and the bike is protected for a few months!
AVOID TIRES, BRAKE ROTORS, CALIPERS AND BRAKE PADS! (I wrap them in Saran wrap)
http://learchem.com/products/acf-50.html
